New Chastity Device Company

Discussion in 'Chastity device reviews and discussions' started by dayxwalker, Oct 16, 2018.

  1. dayxwalker
    Offline

    dayxwalker Member

    Joined:
    Sep 3, 2014
    Messages:
    45
    Likes Received:
    27
    Trophy Points:
    28
    Gender:
    Male
    Local Time:
    4:25 AM
    Hi All
    I hope you don’t mind me posting this in here. I would like to introduce our new Company ‘Abstained’. We design and manufacture chastity devices sized to your needs. All our designs are parametric allowing us to change diameters, lengths, PA gauges etc with ease. Our designs are then manufactured with 3D printing technologies and hand finnished to an extremely high standard in an colour you wish. Our products are focused on comfort and security and as a result we are moving away from the typical padlock or intergrated lock approach. Our design philosophy is to move towards custom locking screws that provide a solid preload between interfacing parts. This prevents any sort of movement that usually results in pinching. It also allows ffor further geometry freedom with our designs.

    I would like you to invite you to visit our website which it being updated frequently

    www.abstained.co.uk
     
  2. lockedUp24byKH
    Offline

    lockedUp24byKH Yes Dear...Right away.

    Joined:
    Feb 7, 2014
    Messages:
    391
    Likes Received:
    178
    Trophy Points:
    53
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    Ireland
    Local Time:
    4:25 AM
    Congratulations I really hope it's successful.
     
    dayxwalker likes this.
  3. Doug Scibor
    Offline

    Doug Scibor Active member

    Joined:
    Aug 10, 2016
    Messages:
    177
    Likes Received:
    240
    Trophy Points:
    53
    Gender:
    Male
    Occupation:
    Technical
    Location: (Country, Region - and perhaps even City?):
    Atlanta, GA USA
    Local Time:
    11:25 PM
    The inability to visit your website without signing into a Google tracking engine will discourage many from visiting. For those that have already visited but weren't prompted for credentials, Google knows a little more about you.
     
    LadyBlaze likes this.
  4. Dr MBogo
    Offline

    Dr MBogo You heard the lady! In you go.....

    Joined:
    Aug 12, 2017
    Messages:
    296
    Likes Received:
    461
    Trophy Points:
    73
    Gender:
    Male
    Local Time:
    10:25 PM
    Good luck. Got anything for a frenum piercing?
     
  5. Adam444
    Offline

    Adam444 Member

    Joined:
    Oct 14, 2018
    Messages:
    133
    Likes Received:
    105
    Trophy Points:
    43
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    Pennsylvania, USA
    Local Time:
    11:25 PM
    Good luck with your venture!

    Not to be negative but both your devices look a little "bulky." Are these 3D printed plastic or metal devices.
     
  6. Shepherdsflock
    Offline

    Shepherdsflock Active member

    Joined:
    Mar 10, 2016
    Messages:
    603
    Likes Received:
    695
    Trophy Points:
    103
    Gender:
    Male
    Local Time:
    10:25 PM
    It looks really big. The big knob at the end is kind of weird looking.
     
  7. Tall Chaste Guy
    Offline

    Joined:
    Jun 1, 2018
    Messages:
    32
    Likes Received:
    29
    Trophy Points:
    18
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    London
    Local Time:
    4:25 AM
    It's always good to see more custom chastity manufacturers and especially exciting for there to be one based in the UK! Wishing you all the best.
     
  8. dayxwalker
    Offline

    dayxwalker Member

    Joined:
    Sep 3, 2014
    Messages:
    45
    Likes Received:
    27
    Trophy Points:
    28
    Gender:
    Male
    Local Time:
    4:25 AM
    Hi Doug
    I am not sure why the site was asking you to sign into anything. The site should be open like any other. If anyone else has seen this please let me know.
     
  9. dayxwalker
    Offline

    dayxwalker Member

    Joined:
    Sep 3, 2014
    Messages:
    45
    Likes Received:
    27
    Trophy Points:
    28
    Gender:
    Male
    Local Time:
    4:25 AM
    Hi Adam. The captive PA is actually very descrete. It’s sized to fit the head of the penis exactly and has a 4mm thick shell so in total the head of your penis is 8mm larger in diameter when fitted.
    The Isolator is still very much work in progress and is not for sale right now and I agree right now it looks bulky. The objective of the design is to prevent anything touching the sensitive parts of the penis hence the bulge. I will be tweaking the bulge shape so it only bulges around the sensitive area behind the head on the underside.
     
  10. Adam444
    Offline

    Adam444 Member

    Joined:
    Oct 14, 2018
    Messages:
    133
    Likes Received:
    105
    Trophy Points:
    43
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    Pennsylvania, USA
    Local Time:
    11:25 PM
    Not having a piercing, I'd only be interested in the Isolator. Maybe what you are looking for is more of an anatomical shape for the area around the glans.

    While I'm sure it's not practical and maybe impossible but what would be interesting would the the ability to get a 3D scan of the users genitals. From there generate a device sized to fix the wearer exactly...
     
  11. Mirandite
    Offline

    Mirandite Mirandite by faith

    Joined:
    Oct 17, 2018
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Gender:
    Male
    Occupation:
    Clinical Hypnotist
    Location: (Country, Region - and perhaps even City?):
    South East England
    Local Time:
    4:25 AM
    If that is an issue use Firefox and DuckDuckGo as a search engine. This will avoid the problem of being spied upon. M
     
  12. dayxwalker
    Offline

    dayxwalker Member

    Joined:
    Sep 3, 2014
    Messages:
    45
    Likes Received:
    27
    Trophy Points:
    28
    Gender:
    Male
    Local Time:
    4:25 AM
    The Isolator design is in the Alpha phase of development (Prototype). Our development process involves multiple design iterations with in house testing before we then move onto free product testing with the public with Beta level designs. Only then do we release the product for purchase. We will take your feedback on the bulky head area and make improvements in the coming days.

    As for scanning users genitals this is something we are looking at. 3D scanning hardware has come down in price recently. The size of the hardware is easily postable but it would require a deposit based approach to ensure it is returned.
     
    Mark Owen likes this.
  13. Adam444
    Offline

    Adam444 Member

    Joined:
    Oct 14, 2018
    Messages:
    133
    Likes Received:
    105
    Trophy Points:
    43
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    Pennsylvania, USA
    Local Time:
    11:25 PM
    As I said I don't know how practical 3D scanning would be given the variable nature of male genitalia throughout the day. Penises grow and shrink, testicles change positions, etc. But it sounds really neat! If you need a volunteer, let me know.
     
  14. dayxwalker
    Offline

    dayxwalker Member

    Joined:
    Sep 3, 2014
    Messages:
    45
    Likes Received:
    27
    Trophy Points:
    28
    Gender:
    Male
    Local Time:
    4:25 AM
    Yes you right the shape of them change so much. I think you would need to take a scan when the testicles are hanging low rather than when they are tight.
     
  15. Chaste J.
    Offline

    Chaste J. Active member

    Joined:
    Dec 14, 2017
    Messages:
    702
    Likes Received:
    811
    Trophy Points:
    103
    Gender:
    Male
    Local Time:
    4:25 AM
    Good luck with your new venture! I look forward to future (unpierced) developments
     
    dayxwalker likes this.
  16. latexbound
    Offline

    latexbound Locked

    Joined:
    Dec 4, 2010
    Messages:
    754
    Likes Received:
    245
    Trophy Points:
    43
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    Wales, UK
    Local Time:
    5:25 AM
    Good luck with the venture! And good to see more UK chastity-makers!
     
    dayxwalker likes this.
  17. JosieLynn Jewell
    Offline

    JosieLynn Jewell Active member

    Joined:
    Feb 12, 2018
    Messages:
    321
    Likes Received:
    414
    Trophy Points:
    73
    Location: (Country, Region - and perhaps even City?):
    Michigan, USA
    Local Time:
    11:25 PM
    Would you be able to tell potential customers what material the device is made of (most specific than "plastic" - is it nylon, abs, pla, something else?). Also, what are the specifics of the finish? I know UK regulations regarding body-contact paint (not sure if it is paint or not) are pretty strict.
     
  18. dayxwalker
    Offline

    dayxwalker Member

    Joined:
    Sep 3, 2014
    Messages:
    45
    Likes Received:
    27
    Trophy Points:
    28
    Gender:
    Male
    Local Time:
    4:25 AM
    Hi Josie
    We would prefer not to share our IP openly to avoid competitors from duplicating our products. We have many options for printing methods and materials along with finishes. We will soon be advertising our devices in aluminum although this would be a costly option. If this aluminum option is something the customer wants we would strongly advise a printed option first to ensure the design is perfectly suited to their specific dimensions, before committing to the costly option of aluminum.
     
  19. Nicoftime
    Offline

    Nicoftime The suspense is terrible...I hope it lasts

    Joined:
    May 24, 2016
    Messages:
    3,487
    Likes Received:
    6,000
    Trophy Points:
    143
    Gender:
    Male
    Occupation:
    Railroad
    Location: (Country, Region - and perhaps even City?):
    South of Lacrosse Wisconsin
    Home Page:
    Local Time:
    10:25 PM
    Glad to see another company out there, especially one that has ideas for the pierced.

    I understand your desire to move away from the padlock, but wow, three security screw? I think my wife would feel like she’s putting a shelf together. It certainly doesn’t have the appeal of being unlocked...more like, here’s your screwdriver.

    I can’t imagine pee wouldn’t accumulate in the large gap where your ring is enclosed, even if you managed to pee straight out the hole, there would be drips from piercing. Like the idea of a ring free device that doesn’t have to be so long though (I’m a shorty).

    Just some well meaning criticism, and I do hope everything goes great!!!
     
  20. dayxwalker
    Offline

    dayxwalker Member

    Joined:
    Sep 3, 2014
    Messages:
    45
    Likes Received:
    27
    Trophy Points:
    28
    Gender:
    Male
    Local Time:
    4:25 AM
    Hi Nicoftime
    We can adapt to feedback very quickly as you can see from the attached image. We have added a drainage feature to the CBR area. I understand your feedback on the 3 security screws. However 3 provide a triangle pattern that spreads the loading evenly across the mating faces for the clamshells. This results in zero chance of pinching once fitted. We put comfort first then security second. If it takes a little longer to install or remove as a result then we see this as a good trade off for comfort. Thanks for your feedback it’s appreciated
     

    Attached Files:

    Mark Owen likes this.
  21. Nicoftime
    Offline

    Nicoftime The suspense is terrible...I hope it lasts

    Joined:
    May 24, 2016
    Messages:
    3,487
    Likes Received:
    6,000
    Trophy Points:
    143
    Gender:
    Male
    Occupation:
    Railroad
    Location: (Country, Region - and perhaps even City?):
    South of Lacrosse Wisconsin
    Home Page:
    Local Time:
    10:25 PM
    Your certainly welcome and glad that it was received well. I understand your view on comfort over convenience, perhaps if I was a self locker, it would be perfect. No one there waiting for me to fiddle with screws, plenty of time to keep track of them and place them so they don’t get lost, no one that might lose interest if it takes a few minutes to unlock, plus if you were self locking, it would help keep you on the straight and narrow since release isn’t just a turn of a key away.
     
    dayxwalker likes this.
  22. JosieLynn Jewell
    Offline

    JosieLynn Jewell Active member

    Joined:
    Feb 12, 2018
    Messages:
    321
    Likes Received:
    414
    Trophy Points:
    73
    Location: (Country, Region - and perhaps even City?):
    Michigan, USA
    Local Time:
    11:25 PM
    More power to you if you can get people to put something of unknown substance and reactivity on their most private places. I'm just a fan of transparency...
     
  23. dayxwalker
    Offline

    dayxwalker Member

    Joined:
    Sep 3, 2014
    Messages:
    45
    Likes Received:
    27
    Trophy Points:
    28
    Gender:
    Male
    Local Time:
    4:25 AM
    What’s an extra 60 seconds to unlock vs 3+ weeks of pinching ;-)
     
    Mark Owen, DommeLP and Chaste J. like this.
  24. Mark Owen
    Offline

    Mark Owen Member

    Joined:
    Mar 13, 2015
    Messages:
    73
    Likes Received:
    30
    Trophy Points:
    18
    Gender:
    Male
    Occupation:
    Student
    Location: (Country, Region - and perhaps even City?):
    Sicily
    Local Time:
    5:25 AM
    Probably more concerns about wifey getting more excuses about not unlocking you :p

    Probably I would add a way not to loose the screws. Maybe a small metal wiring passing between the head and the fillet...
     
  25. dayxwalker
    Offline

    dayxwalker Member

    Joined:
    Sep 3, 2014
    Messages:
    45
    Likes Received:
    27
    Trophy Points:
    28
    Gender:
    Male
    Local Time:
    4:25 AM
    Hi Mark
    I can look at some method to retain the screws however we supply a spare screw and we also stock them on our website. I appreciate all the feedback so keep it coming.
     
    Mark Owen likes this.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice