I have now almost finished my order sizes and would like to know, would you do something differently in retrospect or change something? My Choice Ba25 pa Cockring 40mm Overall Length 65mm Cage dia 36mm But I'm afraid to make a mistake, eg that the cage is too narrow, rather 38mm. Or that the cage is too short / too long. It is hard for me to make a final decision. My current China cage on the pictures
@jemima is right. It's so personal. My recent BA cage was a little less than 40mm in ring size (37 x 39mm oval), 64 mm in length and 35mm in ID and it is perfect for me. You need to think about your gap too! I went with 11mm horizontal gap and 14mm diagonal gap and that is a good balance to not be too tight and also not to let my relatively small nuts from slipping out. Your sizing would be only slightly too large for me but would still work. It's really hard to say until you try it on. I am currently selling my first BA cage (see the For Sale section if anyone is interested) because it was really close to perfect but off just enough that I wanted to go for a second shot to really home in on the right fit for me. You may have to do the same as painful as that might be. I bought digital calipers to use on my cheap chinese cage that fit pretty darn well to figure out what I wanted to change from that and even with that, I was still off a little. I also bought a cheap 1.5" ring from the hardware store to realize that I was able to go less than 40mm in ring size and that an oval ring would be better.
Dense bars a must. can't feel the dick but can keep clean. 0 pleasure has to be off for any feeling. Don't forget pa measurement deal breaker if wrong. Ask him about the pa measurements