CB6000 – did I get the wrong size?

When i summarize your experience with my own it looks like CBXXXX style devices are just not for a grower. I am a grower too and met the same problems. To make things worse i could pull out of this device and cum in it. So i see 3 options for you:

1. Small open metal cage, at least it will ease urination. Examples are MM Jailbird http://www.maturemetal.com/jail-bird/ or Queen's Keep http://www.maturemetal.com/queens-keep/, cheap Chinese clones also exist.
2. If you are ready to make PA, there is a lot of PA devices like this http://cb-x.com/pa_5000_details.htm/ It is even more open and easy to urinate or clean but PA piercing is necessary.
3. If you like CBT (like me, for example) you could try KTB like this http://malechastitynow.com/index.php?route=product/product&path=75&product_id=55/ Probably it is not your case because painful erections is what KTB made for.

 

@DoubleMartiniTO i seen your pics, giggle, and you a lot too little for that cage.

 

If you want to stay with plastic, try getting the CB-6000s cage (the 's' is for 'short'). Many places sell just the cage part separately, so you don't need to buy a whole new device.

The trick is to keep your penis at it's flaccid size, so when you're aroused, it has nowhere to go. If you're serious about chastity, steel is the best option - no danger of splitting the cage, and the right design is easier to keep clean. Be wary of the Chinese knockoffs, as some are not true surgical steel, and can rust or irritate the skin.

 

Well, one of two things could happen - the first is that because your penis would be trapped in a flaccid size, you'd get 'stiff', but not grow to an erection. A very addicting sensation, not painful at all. Blood goes into your member, but since it can't swell up, not much happens. Think of putting a balloon in a cup and trying to inflate it.

The second possibility is that the welds fail on the plastic and the cage splits open. Not pleasant, but it does happen. The CB range is a good starter for people who, like yourself, want to investigate chastity. If you find it's to your liking (and especially if it's to your good lady's liking), then you may want to seriously consider moving up to steel. Yeah, it's more expensive, but you can get a custom fit, and you know it's not going to bust open when you get turned on.

 

I reckon going with the 6000s would seem to be your best bet. See if works then look for metal befor ethe plastic tube splits.

Splitting is an issue (and usually very painfull) its a shame because its not as though Millers could not afford to look into making their tubes all one piece.


I really would reconsider about not having a PA. Ask anyone whose had it done, most of hem wouldn't go back.

 

Not so worried about how small when soft 7 inches how yummy xx
Sorry to get back to your question I would take the opposite view re the cheap stainless steel ones. Be a good place to try out one or more for size to get an idea of what to order if you went
expensive and if you are going to make chastity a long term thing in your relationship.
Xx Wendy

 

Martini,

Mature Metal will add a bar to the underside of a jailbird or queens keep (I had it done to my queens keep) which greatly improves security. Or you could go for a watchful mistress or pet trap which is a less open design. Get the sizing rings and take your time getting the correct measurements.

 

Echo that. I'd go further than that though. I am uncomfortable when not locked.

When I told my then partner that she told me not to worry as my comfort in that regard was one of her main priorities.

 

Hi,
I'm new here and this is my very first comment.

I'm most interested on how to turn a Jailbird "inescapable". Could you tell more about that additional bar by MM?

Thanks a lot for any information.

 

The bar goes on the underside and blocks access to that sensitive area, making it much more difficult to orgasm with the cage on. It does nothing to prevent pull out.

 

And Do you know how to improve on security for pullouts on Jailbirds?

 

The only way to prevent pullout on a trapped-ball device is with a PA or a urethral insert.

 

Yeah... :-(
I was afraid to hear that.
And I guess the best option for the urethral insert is Stellworxx Looker 01/02?
Many thanks for the information Billus & Subdomain.

 

Ultimately pullout is irrelevant, since you can orgasm or ejaculate without direct stimulation to the penis. Some guys put a wand on their cage, others get it from riding a dildo anally. I'm sure there are other ways to get there.

 

When using the small ring that came with my device, it is absolutely impossible to pull out of the ring. It's even difficult when the cage is off. Problem is it's too tight and causes chafing, so I've been looking into some other options for improving security and comfort.

 

I know I could pull out, but don't know if I could get back in. Therefore, I won't try it. First of all it would disappoint my keyholder and secondly it would ruin our game.

My wife would never allow a piercing and I'm not sure I would want one. Also, it's quite a process to stretch it to the proper gauge.

For me, the cage is enough of a deterrent.

 

I agree with you all guys...

... my wife would not allow a PA either,

... I had donne the wand thing, but the final result was not worth,

... the mind set is the point of the game and

... I've reduced my base ring from 1 7/8 to 1 3/4 and to 1 5/8 and still could pull out.

By the way, I never did it when pulled out and yes, you can get back in... perfectly. I did today with the smallest base ring and a little oil.

It's just that I'm looking for the thrill of total, unavoidable, dependence on Her.

I'm reading "PansyTart's measuring system for custom-fit devices". Great deal of information here at the Mansion.