Early 3d model for printing

Discussion in 'Chastity device discussions and reviews' started by lockednloving, Jun 29, 2013.

  1. lockednloving
    Offline

    lockednloving LockedNLoving

    Joined:
    Apr 27, 2010
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    1
    Local Time:
    4:12 AM
    I've been working on some 3d models for chastity devices that can be printed on a 3d printer or through shapeways or similar.
    Here's a pic of a recent working model...

    CD.png

    This is a pretty slow project (I have a day job), but I've gotten a couple prototypes of the locking mechanism made.
    It's evolving, I've made the base ring a little bigger and tried to address some pinching possibilities..
    The model is fairly well parameterized, so I can customize the dimensions pretty easily.

    I would love to hear feedback or suggestions..
    I'd also be interested to hear about experiences and advice on marketing chastity devices..

    I'm not sure about the long term wear-ability/durability of many of the 3d printing materials.
    The various plastics available at shapeways state that they are not 'food safe', and I'm not sure about the strength/durability.
    The metal materials are probably usable, they come out a little rough, but could be ok..
    Also not sure if shapeways would let me open a store to sell sexually related models..
    they say No sexually explicit content.. are chastity devices explicit?
    Once I have a working model, I'll order one and see what they say..

    Let me know what you think..
    Thanks
     
  2. charger71
    Offline

    charger71 Long term member

    Joined:
    Jan 19, 2013
    Messages:
    161
    Likes Received:
    26
    Trophy Points:
    38
    Gender:
    Male
    Occupation:
    have one
    Local Time:
    6:12 AM
    I realize this is just a rendering but am curious as to how you attach the base ring to the cage and where the locking mechanism would go
     
  3. lockednloving
    Offline

    lockednloving LockedNLoving

    Joined:
    Apr 27, 2010
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    1
    Local Time:
    4:12 AM
    The locking mechanism will just be on the top of the cage, and then I'll add a bar on the top of the ring that attaches to the locking mechanism.
    The Holy Trainer that you're wearing in your avatar seems to have an interesting mechanism..
     
  4. charger71
    Offline

    charger71 Long term member

    Joined:
    Jan 19, 2013
    Messages:
    161
    Likes Received:
    26
    Trophy Points:
    38
    Gender:
    Male
    Occupation:
    have one
    Local Time:
    6:12 AM
    It has a dovetail joint in the base ring and the sheath has a post that fits in the center. Once the two pieces fit together then the lock cap fits over the post locking them in place.
     
  5. charger71
    Offline

    charger71 Long term member

    Joined:
    Jan 19, 2013
    Messages:
    161
    Likes Received:
    26
    Trophy Points:
    38
    Gender:
    Male
    Occupation:
    have one
    Local Time:
    6:12 AM
    What kind of materials are you going to use to construct your device?
     
  6. lockednloving
    Offline

    lockednloving LockedNLoving

    Joined:
    Apr 27, 2010
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    1
    Local Time:
    4:12 AM
    That's still TBD.. shapeways has a variety of materials: http://www.shapeways.com/materials
    The strong flexible plastic and stainless steel are probably the most likely materials.
    neither say they are 'food safe' which is a little concerning..

    I'd like to invest in a 3d printer and most of those use various ABS and PLA plastics...
    http://www.bitsfrombytes.com/content/3d-printing-materials

    There are other places that do prototyping with medical grade plastics, those may be more costly, I need to research them further..
     
  7. charger71
    Offline

    charger71 Long term member

    Joined:
    Jan 19, 2013
    Messages:
    161
    Likes Received:
    26
    Trophy Points:
    38
    Gender:
    Male
    Occupation:
    have one
    Local Time:
    6:12 AM
    I'm interested in seeing the finished product
     
  8. charger71
    Offline

    charger71 Long term member

    Joined:
    Jan 19, 2013
    Messages:
    161
    Likes Received:
    26
    Trophy Points:
    38
    Gender:
    Male
    Occupation:
    have one
    Local Time:
    6:12 AM
    have you got a working model yet?
     
  9. lockednloving
    Offline

    lockednloving LockedNLoving

    Joined:
    Apr 27, 2010
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    1
    Local Time:
    4:12 AM
    Not yet, I'm still refining the locking mechanism... and it's a slow process, 1-2 week turnaround time..
    It will be a while before I have something ready for printing...
     
  10. Gemz
    Offline

    Gemz Member

    Joined:
    Jul 13, 2013
    Messages:
    32
    Likes Received:
    22
    Trophy Points:
    8
    Gender:
    Female
    Local Time:
    12:12 PM
    WOW, never seen 3D printing, not even sure what it is but if this is achievable then you could make you own cage to your own spec
     
    manintyres likes this.
  11. Leiothrix
    Offline

    Leiothrix Junior Member

    Joined:
    Jan 24, 2010
    Messages:
    89
    Likes Received:
    42
    Trophy Points:
    18
    Local Time:
    9:12 PM
    How do you make it smooth? With my understanding of 3D printing I thought you were left with a fairly rough finish which would need to be sanded.
     
  12. kaeru
    Offline

    kaeru Member

    Joined:
    Sep 12, 2013
    Messages:
    18
    Likes Received:
    1
    Trophy Points:
    13
    Gender:
    Male
    Local Time:
    4:12 AM
  13. detainee
    Offline

    detainee Member

    Joined:
    Aug 22, 2013
    Messages:
    25
    Likes Received:
    8
    Trophy Points:
    13
    Local Time:
    7:12 AM
    I was very skeptical about the rough finish too. The acetone vapor treatment seems like a great idea to solve that problem.

    Some of the thinner parts in the design look fragile, but I'm not an expert in 3D printing so take that with a grain of salt. I could imagine the acetone eats a little bit of the material away (or at least disperses it) to other areas.
     
  14. Carumbad
    Offline

    Carumbad Junior Member

    Joined:
    Feb 27, 2010
    Messages:
    22
    Likes Received:
    2
    Trophy Points:
    3
    Local Time:
    12:12 PM
    Interesting thread! I've been thinking along the same lines myself, firstly just to print improved parts to add to the CB6000S.

    I have the HolyTrainer and I'm pretty convinced that's actually a 3d printed device. I'm sure that printed objects have come along way in terms of quality and durability looking at some of the precision things now being printed. I'm sure a printed chastity device would be more than workable.
     
  15. AliceInBondageLand
    Offline

    Moderator Verified Female

    Joined:
    Apr 5, 2012
    Messages:
    617
    Likes Received:
    197
    Trophy Points:
    43
    Home Page:
    Local Time:
    4:12 AM
    FINALLY someone using maker bots to create what I have been dreaming about since the darn things showed up at Noise Bridge.

    I am also very interested in using their 3D scanning technology to create "ultra custom" fits.
     
  16. kaeru
    Offline

    kaeru Member

    Joined:
    Sep 12, 2013
    Messages:
    18
    Likes Received:
    1
    Trophy Points:
    13
    Gender:
    Male
    Local Time:
    4:12 AM
    Thankfully the stereo lithography printers are finally getting into consumer's hands. I don't think I would ever use a Makerbot or any other extrusion based printer for this due to the final product that comes from them. Stereo lithography however seems to be making huge strides into the strong (100% infill), with a smoother finish, and less lateral weakness. Certainly a much better method for something like a delta robot for sure. Hoping to put one together here in the next few months, and mess around with it.
     
  17. spider202
    Offline

    spider202 Long term member

    Joined:
    Sep 11, 2010
    Messages:
    163
    Likes Received:
    56
    Trophy Points:
    28
    Local Time:
    11:12 AM
    Hi guys I love this thread.
    What about split the cage down the middle and put teeth inside to grip the penis shaft when it is closed.
    About the material.
    I thought you were going to send it off to get it transferred from plastic to polished steel or chrome.
     
  18. attheedge
    Offline

    attheedge Junior Member

    Joined:
    Oct 23, 2009
    Messages:
    8
    Likes Received:
    4
    Trophy Points:
    3
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    colorado
    Local Time:
    5:12 AM
  19. filltee
    Offline

    filltee Junior Member

    Joined:
    May 21, 2010
    Messages:
    3,098
    Likes Received:
    2,206
    Trophy Points:
    143
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    Sheffield. South Yorkshire UK
    Local Time:
    12:12 PM
    I am intrigued.
    Supposedly in the non too distant future you will be able to scan your penis and have a custom fit CB made in plastic make the necessary tweaks to get it just right then produce one in stainless steel.

    Once the printing process is perfected and speeded up one could presumably have a steel one assembled in situe. No locks needed no joints just built on and it would be so expensive you could not afford to cut it off.

    Isn't science wonderful. Or maybe not :)
     
  20. LadyFedora
    Offline

    LadyFedora Lady Fedora

    Joined:
    Dec 13, 2013
    Messages:
    68
    Likes Received:
    243
    Trophy Points:
    43
    Gender:
    Female
    Location: (Country, Region - and perhaps even City?):
    Netherlands
    Local Time:
    1:12 PM
    This would be so cool! Just make a 3D scan of my subs penis, design the cage according to those exact measurements. Shrink the design down a few percent ;) And the perfect fitting cage!

    Hope this will be reality soon!
     
  21. filltee
    Offline

    filltee Junior Member

    Joined:
    May 21, 2010
    Messages:
    3,098
    Likes Received:
    2,206
    Trophy Points:
    143
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    Sheffield. South Yorkshire UK
    Local Time:
    12:12 PM
    I think I would have to try doing just that...to myself.
     
  22. spider203
    Offline

    spider203 Long term member

    Joined:
    Nov 22, 2014
    Messages:
    484
    Likes Received:
    328
    Trophy Points:
    73
    Gender:
    Male
    Local Time:
    12:12 PM
    hello I was reading this old thread about 3D printing male chastity belts and I see that the last entry was on the 22 December 2013, and I was just wondering what ever happened with this device, and have any one any different ideas about making one.?
     
  23. mustang66man
    Offline

    mustang66man New member

    Joined:
    Apr 3, 2015
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Gender:
    Male
    Local Time:
    6:12 AM
    I recently acquired a 3d printer and would love to print out a prototype for you,

    please contact me.
    thanks
     
  24. spider203
    Offline

    spider203 Long term member

    Joined:
    Nov 22, 2014
    Messages:
    484
    Likes Received:
    328
    Trophy Points:
    73
    Gender:
    Male
    Local Time:
    12:12 PM
    what about the idea of a disposable chastity device. Would that give more security, and possibly more fun for couples starting out. Using zip lock ties type of fastner.
     
  25. vanelocked
    Offline

    vanelocked Member

    Joined:
    Sep 19, 2011
    Messages:
    43
    Likes Received:
    0
    Trophy Points:
    6
    Gender:
    Male
    Local Time:
    6:12 PM
    Hi! I am looking for a 3d file for a tube only (no ring) for frenum pierced penis...!
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice