Introducting - The Cherry Keeper

Discussion in 'Chastity device reviews and discussions' started by JosieLynn Jewell, Oct 2, 2018.

  1. JosieLynn Jewell
    Offline

    JosieLynn Jewell Active member

    Joined:
    Feb 12, 2018
    Messages:
    361
    Likes Received:
    468
    Trophy Points:
    73
    Location: (Country, Region - and perhaps even City?):
    Michigan, USA
    Local Time:
    5:43 PM
    Locktober 1st, 2018,

    After many months of design, revision, and testing, I am proud to finally reveal the final product - The Cherry Keeper!

    [​IMG]
    (The Full Cherry Keeper)

    Not all of those goals were hit right away, but eventually the original list of goals was checked off one by one
    • provide a stronger mechanical mounting system
    • Use of the magic locker for the smallest profile
    • less flexing of the joint for a more consistent ring gap
    • prevent pitching on joining
    • have a definitive "fully seated" position so it's easier to know that the lock should slip in
    • lower profile / less bulky
    • better lock tolerances

    Along the way, ideas came up, and revisions were made, and ultimately, a few more features were added
    • ergonomic ring design
    • Three different styles of padlock and single use plastic lock support
    • mounting system for add-ons
    • the unicorn add-on
    • the realistic dildo add-on
    • the bullet-vibe add-on

    To say I'm pleased with everything available in the Cherry Keeper suite is an understatement. I want to give many thanks to the members of CM and the /r/chastity sub-reddit who provided input and served as testers - without your input, it would not have been possible.

    Over the next day or so, the Cherry Keeper products in my Shapeways store will be populated, and several standard offerings will be made available as combos. Individual pieces will also be available if you want something other than the combos offered. In the future, I will make printable files for three ring sizes and two cage sizes freely available to members of Chastity Mansion. I will also begin taking custom orders for people who want specific size rings and cage lengths - custom add-ons are only limited by your imagination, the size of package, and the laws of physics!

    The full image gallery is here, which includes many pictures of pieces printed on a home FDM printer, as well as a few shots of the finish on the product as produced by Shapeways - what is shown is the second to last revision, but it shows the finish and the vibrant purple color wonderfully.

    Gallery:
    https://imgur.com/a/WXonD28

    Shapeways Store:
    http://cherrykeeper.com
     
  2. jasonpatalonis
    Offline

    jasonpatalonis Active member

    Joined:
    Aug 12, 2013
    Messages:
    235
    Likes Received:
    202
    Trophy Points:
    53
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    Los Angeles
    Local Time:
    2:43 PM
    Some truly brilliant engineering here! Well done. I am most eager to hear from the first female to feel that dildo inside of her and how she likes it.

    Good luck on sales!
     
    tegelad likes this.
  3. JamieV
    Offline

    JamieV New member

    Joined:
    Sep 19, 2018
    Messages:
    4
    Likes Received:
    6
    Trophy Points:
    3
    Gender:
    Male
    Local Time:
    5:43 PM
    I love the attachment. Very innovative!
     
    JosieLynn Jewell likes this.
  4. slappy
    Offline

    slappy Member

    Joined:
    Feb 24, 2015
    Messages:
    73
    Likes Received:
    20
    Trophy Points:
    18
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    Missouri
    Local Time:
    4:43 PM
    Being 3d printed and somewhat pourous is this safe for 24-7 wear? Also are the fun cage and cherry keeper parts and locking accesories compatible with each other? Thanks
     
  5. JosieLynn Jewell
    Offline

    JosieLynn Jewell Active member

    Joined:
    Feb 12, 2018
    Messages:
    361
    Likes Received:
    468
    Trophy Points:
    73
    Location: (Country, Region - and perhaps even City?):
    Michigan, USA
    Local Time:
    5:43 PM
    Thank you for the kind words! What if the first person to feel it inside them was a male? I'd love to hear how it goes, regardless of gender or hole :)
     
  6. JosieLynn Jewell
    Offline

    JosieLynn Jewell Active member

    Joined:
    Feb 12, 2018
    Messages:
    361
    Likes Received:
    468
    Trophy Points:
    73
    Location: (Country, Region - and perhaps even City?):
    Michigan, USA
    Local Time:
    5:43 PM
    Thanks for the questions!

    So, the material Shapeways uses is Nylon 12, which according to MSDS is safe for all body contact and, as I mentioned in another post, has no known adverse affect even when ingested.

    From http://www.cosmeticsinfo.org/ingredient_details.php?ingredient_id=1570
    "Nylon ingredients are polymers and are not absorbed through the skin; due to the poor absorption of polymers, there is usually little concern for human health after exposure to polymers when they are used in cosmetics and personal care products"

    I'm not a scientist, nor am I the first person to manufacture such a device in this fashion, and I have a high comfort level in saying it's low risk. If you have a skin sensitivity to Nylon, then it makes sense to avoid any 3D printed product made of Nylon.

    If completely sealing a product is where you want to be, you'll want to look into a conformal coating product. It is a spray or can be applied with a brush, and is commonly used to waterproof circuit boards, and in certain homes, to seal sex toys :)

    To answer your last question - No, the parts from the New Fun Cage and the Cherry Keeper are not interchangeable.

    Warm Regards,
    JosieLynn Jewell
     
    Peter Rabbit and slappy like this.
  7. slappy
    Offline

    slappy Member

    Joined:
    Feb 24, 2015
    Messages:
    73
    Likes Received:
    20
    Trophy Points:
    18
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    Missouri
    Local Time:
    4:43 PM

    Wow thanks for all the info!!! Make sense to me
     
  8. jasonpatalonis
    Offline

    jasonpatalonis Active member

    Joined:
    Aug 12, 2013
    Messages:
    235
    Likes Received:
    202
    Trophy Points:
    53
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    Los Angeles
    Local Time:
    2:43 PM
    Great point! I'd volunteer!
     
  9. Panda2010
    Offline

    Panda2010 There's a fine line between pleasure and pain

    Joined:
    Apr 1, 2016
    Messages:
    311
    Likes Received:
    426
    Trophy Points:
    73
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    Australia (North east Victoria)
    Local Time:
    9:43 AM
    @JosieLynn Jewell Great work. I love the low profile and name of the Cherry Keeper.
     
    JosieLynn Jewell likes this.
  10. Dr MBogo
    Offline

    Dr MBogo You heard the lady! In you go.....

    Joined:
    Aug 12, 2017
    Messages:
    325
    Likes Received:
    520
    Trophy Points:
    103
    Gender:
    Male
    Local Time:
    4:43 PM
    I want to order one! My beautiful wife/KH loves taking me with a strap on. We'd both love this!
     
  11. JosieLynn Jewell
    Offline

    JosieLynn Jewell Active member

    Joined:
    Feb 12, 2018
    Messages:
    361
    Likes Received:
    468
    Trophy Points:
    73
    Location: (Country, Region - and perhaps even City?):
    Michigan, USA
    Local Time:
    5:43 PM
    I'm still working on getting the other cages into the store - if you have a specific size/need and let me know, I can prioritize that.
     
  12. JosieLynn Jewell
    Offline

    JosieLynn Jewell Active member

    Joined:
    Feb 12, 2018
    Messages:
    361
    Likes Received:
    468
    Trophy Points:
    73
    Location: (Country, Region - and perhaps even City?):
    Michigan, USA
    Local Time:
    5:43 PM
    Miss advised on a few spots that she would like more sanding done... it feels like we're close :) The one I made for myself is a semi-flex material (noone sells flexible SLS prints in the US!), and is scaled to match the factory equipment :)
     
  13. suzy maid
    Offline

    suzy maid Member

    Joined:
    Jan 24, 2010
    Messages:
    78
    Likes Received:
    410
    Trophy Points:
    63
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    England
    Home Page:
    Local Time:
    10:43 PM
    Another great product engineered in Michigan

    I wonder who was scanned for the strapon profile.
     
  14. Panda2010
    Offline

    Panda2010 There's a fine line between pleasure and pain

    Joined:
    Apr 1, 2016
    Messages:
    311
    Likes Received:
    426
    Trophy Points:
    73
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    Australia (North east Victoria)
    Local Time:
    9:43 AM
    Speaking of great products from Michigan - All the way from Detroit city - Suzi Quatro still rocks
     
  15. Panda2010
    Offline

    Panda2010 There's a fine line between pleasure and pain

    Joined:
    Apr 1, 2016
    Messages:
    311
    Likes Received:
    426
    Trophy Points:
    73
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    Australia (North east Victoria)
    Local Time:
    9:43 AM
    I have placed an order for the Cherry Picker. Can't wait till it arrives. Well done @JosieLynn Jewell for making this happen. Well done you. I am very happy to support a kindred spirit.
     
    Allen1987 likes this.
  16. Allen1987
    Online

    Allen1987 All for Her

    Joined:
    Aug 20, 2017
    Messages:
    975
    Likes Received:
    2,281
    Trophy Points:
    123
    Gender:
    Male
    Occupation:
    Machinist
    Location: (Country, Region - and perhaps even City?):
    Massachusetts USA
    Local Time:
    5:43 PM
    Hey @Panda2010 I hope this works for you. I know you have tried so hard to find something
    that works for you. @JosieLynn Jewell Thank you for your work on helping others get what
    works for them. Takes a lot of time and testing. Great job.:+1:
     
    Panda2010 likes this.
  17. JosieLynn Jewell
    Offline

    JosieLynn Jewell Active member

    Joined:
    Feb 12, 2018
    Messages:
    361
    Likes Received:
    468
    Trophy Points:
    73
    Location: (Country, Region - and perhaps even City?):
    Michigan, USA
    Local Time:
    5:43 PM
    If it's not perfect for you, you let me know what you'd like changed, and I'll get one drawn up that's closer to perfect for you. My "perfect" has changed over time, so it's got to be about the journey, not just the destination!

    Thank you for the kind words, It feels wonderful to be appreciated :)
     
  18. JosieLynn Jewell
    Offline

    JosieLynn Jewell Active member

    Joined:
    Feb 12, 2018
    Messages:
    361
    Likes Received:
    468
    Trophy Points:
    73
    Location: (Country, Region - and perhaps even City?):
    Michigan, USA
    Local Time:
    5:43 PM
    Now that would be telling :)

    Actually, it's from another modeler, named adid, who released it to the community with attribution license (hence the notice on the product page). I messaged back and forth with him/her a few times, and you can imagine it to be a famous persons cock, or some anonymous strangers cock, because if adid knows, he/she isn't telling!
     
  19. Panda2010
    Offline

    Panda2010 There's a fine line between pleasure and pain

    Joined:
    Apr 1, 2016
    Messages:
    311
    Likes Received:
    426
    Trophy Points:
    73
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    Australia (North east Victoria)
    Local Time:
    9:43 AM
    Production has been completed for my order
     
  20. Panda2010
    Offline

    Panda2010 There's a fine line between pleasure and pain

    Joined:
    Apr 1, 2016
    Messages:
    311
    Likes Received:
    426
    Trophy Points:
    73
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    Australia (North east Victoria)
    Local Time:
    9:43 AM
    Thanks @JosieLynn Jewell Depending on how long delivery to Australia takes, I will get a chance to try it out soon.
     
  21. JosieLynn Jewell
    Offline

    JosieLynn Jewell Active member

    Joined:
    Feb 12, 2018
    Messages:
    361
    Likes Received:
    468
    Trophy Points:
    73
    Location: (Country, Region - and perhaps even City?):
    Michigan, USA
    Local Time:
    5:43 PM
    Their site says 5-9 business days - I'm as excited as you are :)
     
    Allen1987 and Panda2010 like this.
  22. Allen1987
    Online

    Allen1987 All for Her

    Joined:
    Aug 20, 2017
    Messages:
    975
    Likes Received:
    2,281
    Trophy Points:
    123
    Gender:
    Male
    Occupation:
    Machinist
    Location: (Country, Region - and perhaps even City?):
    Massachusetts USA
    Local Time:
    5:43 PM
    @Panda2010 and @JosieLynn Jewell I can't tell you how happy I am to see our community
    help each other. I like to thank CM for making this a place to come together. Good luck to both
    of you. Can't wait to see how it works out.:+1:
     
    JosieLynn Jewell and Panda2010 like this.
  23. NsToy
    Offline

    NsToy Active member

    Joined:
    Feb 11, 2016
    Messages:
    344
    Likes Received:
    201
    Trophy Points:
    53
    Gender:
    Male
    Local Time:
    5:43 PM
    Ordered! Hopefully I love it and can wear it when I go on work trips (re: flights). I ordered the lock cylinder so I could use a numbered tag instead of a magic lock when going through metal detectors.
     
  24. JosieLynn Jewell
    Offline

    JosieLynn Jewell Active member

    Joined:
    Feb 12, 2018
    Messages:
    361
    Likes Received:
    468
    Trophy Points:
    73
    Location: (Country, Region - and perhaps even City?):
    Michigan, USA
    Local Time:
    5:43 PM
    Thank you for your support! I hope it works out wonderfully for you! You may need to do a little work on the plastic locker to get a numbered tag through it. Please give me your honest feedback, and any pictures you want to share are VERY welcome! (In use, or not!)

    Warm Regards,
    JosieLynn
     
    NsToy likes this.
  25. JosieLynn Jewell
    Offline

    JosieLynn Jewell Active member

    Joined:
    Feb 12, 2018
    Messages:
    361
    Likes Received:
    468
    Trophy Points:
    73
    Location: (Country, Region - and perhaps even City?):
    Michigan, USA
    Local Time:
    5:43 PM
    I got a question about the difference between the natural plastic, the processed plastic and the professional plastic via PM, and I thought others might have the same question, so I'm reposting that answer here

    So, I'll link to what Shapeways says about the materials first:
    Versatile & Processed: https://www.shapeways.com/materials/versatile-plastic
    Professional: https://www.shapeways.com/materials/professional-plastic

    The materials are both Nylon PA-12, but they are printed with two different technologies which gives different finishes.

    The versatile plastic is best described as an eggshell finish, while the processed plastic finish is tumbled or blasted to remove some material and provide a smoother finish, and then dyed/sprayed with color.

    The Professional plastic is printed with a newer style of printer that has a better resolution and provides the smoothest finish, and is semi-glossy, but is only available in the two colors as the material starts off as grey, and can be dyed black.

    In the gallery I posted in the first post, most of the pictures are of the prototypes I printed, except the purple cage. That is the processed plastic with the purple finish! It is pretty smooth, but there's definitely a small amount of texture there - it will never be "polished steel" smooth, but it's not coarse against the skin.

    I hope this helps anyone who might have the same question!

    Warm Regards,
    JosieLynn
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice