0ga uncircumcised PA chastity device suggestions.

Please just post a list of suggested custom or non custom options of devices that use the PA peircing and would allow for an excess amount of foreskin around the peircing site.
I ordered this cage to try to get closer with sizing and measurements. Any suggestions or feedback would be very helpful.
https://www.ebay.com/itm/316-Stainl...2349624.m46890.l49286&mkrid=711-127632-2357-0

 

Thank you for posting that ! Please keep them coming.

 

Any more ideas for a cage for an uncut guy with a 0ga PA? Long term wear, highly active day job? Thanks!

 

Thank you so much for all that information and experience. My biggest issue has been hygiene. Now I am at 0ga im hoping to use the PA with a device to trap back the foreskin allowing urine to flow less restricted and not collect under the foreskin. Master wants me to be locked for very long periods but the hygiene has prevented that! I am going to look at the cages you mentioned tonight and educate myself a little more. Thank you for taking the time!

 

Im currently about to buy this cage here.

 

So I ordered this cage here.
https://www.etsy.com/listing/976398908/customizable-dense-bar-chastity-cage
With all my dimensions, hollow PA hook, curved base ring, and a scrotum bar to help keep everything held in place and prevent so much sliding down with sweat and vigorous activity.
I have bought basically every style Chinese cage, printed the ones available on here, began attempting to craft my own from scrap old cages. I know the most crucial part is going to be the PA hook and placement and angle etc. As far as the cage and my dimensions all that's fine. But I've had such an issue finding long term comfort with PA devices. Cursed foreskin. This is my second attempt at getting the glove fit, only now I'm at 0ga! Thankfully the maker will work with me if the PA portion needs adjusting/remaking.
My first custom cage was a tad bit roomy in the length department and caused some painful nights due to too much room to grow. Went from 67mm cage length on the last to just 40mm this time.

 

I pussed out and went with 55mm I felt the 40mm was going to be a little small

 

So if anyone is watching this I care to update. I got my chinese, closed face, hollow PA utilizing cage. I drilled the hole for the PA larger polished it so it was smooth again, put it on because im trying to get into a cage until my new custom cage arrives. Well long story is here is some attached photos the cage seems to be very comfortable. Will report back if anything changes. The mark in pen on my pubic area is going to be a peircing. If anyone has any suggestions about getting peirced there let me know! Imf anyone wants to know my dimensions for the new cage I can attach that also.

 

So I built, and added this belt, to keep things in place. Wow, this is basically a full belt now.

 

So I'm using this closed face cage in the pictures I posted below and urine is an issue. Master agreed we can fully clean every 3 days until the new more open designed cage arrives. Its semi open on the bottom so I mop that and a little of the accumulated behind the closed face, been wearing pantie liners to help with any residual and this will work until the new cage arrives. Good news is for anyone uncut and having all the issues. A PA and properly fit device that uses the PA is the answer. I love how this has been a journey I've purchased 4 custom cages and hundreds of cheap China stuff. Im still not done yet because down the road my wife/master is getting a boob job and told me im getting circumcised at the same time. So ill probably have to get a smaller fitting cage after that. Thank this website and community for getting us here!

 

Thank you for sharing I've hearing all the others who have foreskin and large jewelry. What a pain in the ass for me. Im going to have to have a custom peice made for when im not using the PA hole for locking. My penis is too small and all the 0ga jewlery is 5/8 diameter wayyy to big for me and causes for skin swelling. I had a 12mm diameter hinged style that was nice but the clicker wore out and literally fell out of the peircing hole. So I have to get a custom peice for the such a large gauge and small diameter.



the one I have coming will look similar to this so it should trap the foreskin back enough. My issue always seems to be too much swelling of the foreskin once long term begins. Say after a week, there is so much swelling that I can't roll my foreskin back over the head. So hopefully this cage, will work out better. I was getting the swelling while wearing a swinging loose D lock. When my penis is fixed and the PA is fixed there always seems to be less issue.

 

I was supposed to have replied to you. I did, just didn't link you

 

Should I do cage length 50mm with base ring 44x44 or
Base ring 43x43 with cage length of 57mm?

 

We are wanting to wear more long term so I want to be able to move things around just a fraction.
40mm long and 30mm diameter is about the smallest i can wear but provided no ability to clean well because I can't slide the skin away from the metal enough.

67mm long and 32mm diameter was nice but seems as if though too much length for sure I would turtle alot even with a PA lock.

My current dimensions to the builder are 58mm length 32mm diameter and a 43x43mm base ring. I've been wearing 45mm rings for a while but they always slide i tried a 40x40 curved and it was almost perfect long term, just a smidge too tight. I think this will be a perfect balance of snug and clean. Any other thoughts would be appreciated. Im going to attach the drawing sent.

 

Here are some pictures. Ill take more when the device arrives!

 

I am a bit scared of the swelling due to the PA hook not being s shaped, I sent Badass a request to do the S shape, but I was unsure of dimensions and bend angles etc... I opted for my cage to be open on the bottom where the PA hook is, hope it provides enough freedom of movement.
I had him make me a 00ga for the same cage since I plan to gauge one more time. Also in the near future my keyholder/wife has said she wants to get breast surgery, and wants me to get circumcised at the same time. So the cage will probably get used at some point.
Foreskin + Chastity = have equaled the most pain in the ass expensive process to find a perfect cage.

 

Foreskin swelling. Im going to send it back and hopefully he can tweak the PA portion. Im so tired of foreskin. I wish I could find a solution. My PA is not directly centered since I'm uncut and thats the main issue it puts alot of pressure on the skin trying to pull everything to center. Hopefully he can just remake the PA part and it will be good. If I take the PA part off and just wear jewlery its fine. So at least the measurements were accurate!

 

My next attempt is to mix this cage with this hollow jewelry. This should allow no stress on the foreskin and allow for clean urination.