My husband would like to make his own humbler but we can’t find any dimensions or plans. Does anyone have any idea where to get some?
Sometimes something as simple as two pieces of 3/4 to 1” pieces of doweling about 18” long drilled at each end to put a long bolt through and have wing nuts to close them up can work
I've plans for a home made humbler. Piccies in my album and send me a PM and I'll send you the link. A
Another way I have made them Make a wooden ball crusher. Two pieces of about 1” dowels about 8” long or make one of them about 18-20” long and it can also be used as a humbler. About 6” apart centered on the shorter one drill a hole through the center parallel to each other then center this on the next one and drill those. Now you need two machine screws about 6” long to go through the two of them with wing nuts to be able to tighten them. These will open so you can drop your sack through them then tighten up the wing nuts. If you used a longer one you now have your humbler. To go further get two eye bolts and wing nuts for them about 6” long. These go on each of the other bolts between the dowels and hang down. Now cut a piece of wood or plexiglass to go onto those bolts then when you tighten those wing nuts up it will squeeze your nuts against the dowels. You could put your contacts through the bottom board and they would be plenty tight
Had to wear a humbler once on a session with a pro domme and will never forget the feeling of being stretched and crippled over to releive the pressure. Based on that recollection, I would love to submit to wearing one again! Such sweet torture!