I have tried to order chastity from different countries but none come without a risk of getting into legal trouble so, I have chickened out each time. The chastity sold locally are really expensive (200+ at times) and not quality. I am really looking for some DIY ideas and/or instructional videos for a rather permanent chastity. (ropes are out). All suggestions are greatly appreciated.
If you have any TIG/MIG welding experience, it should be straightforward to make a cage from some stainless rod and bar. Or maybe a 3D printed device - there's a few plans on the site here. There's also some plans on thingiverse for cages and cali's teeth devices.
Perhaps if you put your country in your profile or your post it may be that there are more local resources to help?
Perhaps, I'll learn welding now. Is there like a guide to weld one of my own? Maybe like a blueprint?
I don't know of any guides, but there's lots of photographs in the galleries of various cages. Another option is to use some polycarbonate sheet and drill / mill / cut it to make components
I cannot believe that 'anywhere in the world' a chastity device can be illegal. That statement boggles my mind! It's like saying a bracelet can be illegal. TIG welding for stainless steel is the preferred method but to weld small wires it takes lots of practice and a fair amount of money for a machine. Learning to TIG weld is like learning to play a piano. Practice, Practice, Practice!
Hi, In my opinion, welding is something people either have a knack for or don't. Much like being a musician, artist, surgeon, etc. Sure, you can practice and practice and practice and maybe you'll get real good, but if you don't have that knack for it, you probably aren't going to want to practice. Welding a "cage", I would think, requires quite a bit of precise work. While the technologies are quite different, have you ever done any soldering on electronics work? That's more up my alley, and what I've seen that some call soldering is pure junk! Those who have done it a long time and have the knack, well, everything usually just flows naturally. It's like watching an artist paint a picture. I can solder better than most, but I struggle to draw a circle, let alone a tree or a still-life! LOL Anyway, all that was to say that I would think you'd have a better chance of creating a usable cage using 3D Printing technology. I think your overall investment in equipment and materials will be less, too. Especially if you already have a computer which is compatible with the 3D printer software. As others have said, there are plans available you just download into your printer, adjust sizes to customize and then let the 3D printer do it's thing. It doesn't happen instantly and it's not steel, but it will allow you to try various types of devices and ultimately customize the measurements to fit your needs. THEN, if you actually DO arrive on a good design in plastic that works for you, you might be able to find a skilled welder locally who might build one for you using your 3D printed version as a guide. By the way, welding is a GREAT skill, one very few people have, so if you DO go that route and you find you DO have the knack, you can make a darn good living at it. At least here in the U.S.A. Good Luck, ~subrick
I once had a book called "Kinky Crafts" that had guidelines for a DIY chastity device. Granted, it involved an empty toilet paper roll and string, but hey. I typed "diy chastity" into Google and got some hits: https://www.reddit.com/user/aslisivri/comments/ku3w2c/diy_chastity_cage/ Good luck!
The package i got from OXY.com was a simple 4x3x3 heavy card stock box, no external markings, time sensitive material on the label, sealed in strong brown packing tape with only the UPS label on the outside. Inside it was packed for rattle proofing, each piece separately for no scratching since it is high polish steel, the cage in a separate foam sleeve and everything in a soft blue velvet bag. There is no way that anyone can tell what is inside from the outside. The name of the sender is not even shown only a PO Box, with only the name and address of the receiver. Very discreet. It was so small i was surprised it all fit inside to tell the truth.
The fact is there are countries who inspect everything that is imported either freight or personal luggage. So it ain't going to matter how discrete the packaging is, they're going to look inside. I've had all sorts of innocent stuff looked at and closely scrutinised at customs and confiscated.
You can make a functional penis cage using something called Polymorph Plastic, a modelling material that is like plasticine after soaking in very hot water, but is solid once it has cooled down. It also sticks to itself. Basically you just copy a cage design by wrapping the plastic around a "form" - a shape roughly resembling your penis. The base ring is easy. Then the problem is connecting the two, which will be a fiddle.
I did this a long time ago. It was difficult and looked terrible, also not bath/shower proof. I would not recommend it.
I thought it would be shower proof - showers don't get hot enough. I certainly don't think it will look pretty, but it should be functional enough to get a sense of the experience.
If the devices are sold locally, then logic would dictate that they aren't illegal and therefore should be able to be imported without fear of "legal issues" (unless the OP is talking about a black market to purchase locally, which in itself is illegal anyway?) I would think 3d printing would be the most logical choice unless a decent level of welding knowledge / experience is held. The OP has put India as his country of origin, I'd hazard a guess that in a country of 1 billion or so people, it is highly unlikely that a postal agency has the manpower to inspect every single package that crosses the border.
It doesn't go completely soft, but flexible enough that a locking mechanism would likely fail. Showers probably OK if not too hot, a bath is what I was thinking of really.
That sounds about right. I never really tested mine because it was easier to buy cheap ones. The locking mechanism could be a blob of the material.