Lisalin Cock Cage Design Version 4.0 Final

Hello again,

This is the New and Final Version of the Lisalin Cock Cage.

After a lot of input from the community to the previous version of the Lisalin Cock Cage I took my time and reworked it.
I have added many new features and implemented the community's suggestions.

The main changes in the new and final version are the following:
I have increased the hole in the tip from 6mm to 8mm to allow for easy urination while wearing the Cage.
Also i reworked the belt holding mechanic. Now its optional and removable to allow for more use cases.
Also I add different sizes of the base ring and completely reworked the Cock Cage itself.

I have made 3 different Cock Cage Designs. I have made a Full Cage Version, a Half Cage Version and a No Cage Version.
For every Design I have made 3 different options in Length and 3 different options in diameter so in total 24 different Cock Cage so everybody can find a perfect fit. Look at the Renderings down below to see all the Cages and Sizes that are available now.

For the Base Ring I also made 4 different sizes so everybody can find a good fit. Again see the Renderings down below for all available size options.

Note!
The Plan was to make this Cock Cage as a free version for non Commercial use.
But I can not find any Cock Cage files on the Internet that are as a Complete package as this.
Due to all the different Sizes versions and Cages i ended up working more then 40h until it is as complete as is now.
In total i have 30 STL files. And for those who are interested its actually not just scaling things bigger and smaller. Its actually all hand made. Every Cage every Base Ring is hand crafted in Rhino 7.
So if you want to Support my work you can do this via PayPal here or over at Cults 3D by buying your own set of Files.

If you want to Support me directly you can do this here via PayPal
https://paypal.me/SupportforFlo?country.x=DE&locale.x=de_DE

The Cults 3D Link if you want to get your own set of Files of the Lisalin Cock Cage for non Commercial use.
https://cults3d.com/en/3d-model/naughties/lisalin-cock-cage-version-4-0

Important!
For those who gave suggestions in the last version the final version of the Lisalin Cock Cage will be free. Text me if you want them and what size you want and i will get you a privat Download Link.

Due to Chastity Mansion not allowing more then a couple of files per post i decided to upload the Lisalin Cock Cage to Cults 3D.

Plans for the Future:
If there is interest from the Community we can start a new project soon.
Maybe another design with a integrated Lock next time ? Let me know in the comments what you think if there is interest in a new project or not and how this project could look like.

Special thanks to everyone who made suggestions and worked with me on this project. I wish you a good time and hope I could meet all the expectations.



For the Cock Cage the following options are now available:









No.1 Full Cage diameter 30mm length 65mm final
No.2 Full Cage diameter 30mm length 49mm final
No.3 Full Cage diameter 30mm length 33mm final
No.4 Half Cage diameter 30mm length 65mm final
No.5 Half Cage diameter 30mm length 49mm final
No.6 No Cage diameter 30mm length 65mm final
No.7 No Cage diameter 30mm length 49mm final
No.8 No Cage diameter 30mm length 33mm final
No.9 Full Cage diameter 34mm length 65mm final
No.10 Full Cage diameter 34mm length 49mm final
No.11 Full Cage diameter 34mm length 33mm final
No.12 Half Cage diameter 34mm length 65mm final
No.13 Half Cage diameter 34mm length 49mm final
No.14 No Cage diameter 34mm length 65mm final
No.15 No Cage diameter 34mm length 49mm final
No.16 No Cage diameter 34mm length 33mm final
No.17 Full Cage diameter 38mm length 65mm final
No.18 Full Cage diameter 38mm length 49mm final
No.19 Full Cage diameter 38mm length 33mm final
No.20 Half Cage diameter 38mm length 65mm final
No.21 Half Cage diameter 38mm length 49mm final
No.22 No Cage diameter 38mm length 65mm final
No.23 No Cage diameter 38mm length 49mm final
No.24 No Cage diameter 38mm length 33mm final



For the Base Rings the following options are available:



35mm
40mm
45mm
50mm



This is how it looks printed at home in Elegoo ABS-Like Resin. Here you can see the Cock Cage No.1(Full Cage diameter 30mm length 65mm) with the 40mm Base Ring and the removable belt holder:

 

Thank you very mutch

The inner diameter of the Cage (30mm,34mm,38mm) is measured at the entrance.
That means the tube has that inner diameter until you get to the end of the tube there is a restictive ring with a inner diameter of 26mm to hold back the foreskin and the glans part is then bigger.
Bigger then the inner diameter of the tube.

I was thinking about selling printed versions but the thing is even though having a resin printer the prints are not perfect they always have some imperfections nomatter what it will always be printed at home and not injection molded like a chines factory would do it.
I dont know how this models would print on a 3D printer with hard fillament but i m not sure if the tollerances are so good that the parts would fit together after printing and also i think this would make even more imperfections.

If your looking for a Resin 3D printer i can recommend Elegoo i have a Elegoo Mars 3 it has not mutch buiöd voöume but for something like this it is enough and for homemade the printing quality is very good the tolerances fit perfectly within 0,2mm and there is not mutch filing and sanding nedded after printing just the places where the support structures are connected to the model.

 

No i dont do any post processing or painting. The only post processing I do is filing and sanding the contact points of the support sturctures.

I have never had any skin issues. Just make sure to completley cure the resin before using it. Usually after curing the part and removing the support structure i wash the part with soap under water thats it. And never had any problens so far.

I use the Elegoo ABS-Like 2.0 Grey Resin.
But i Think every resin is skin save as long as you cure it completley and wash it well before use.

 

I can make a 47,5mm Ring. I will let you know where you can Download it when its Ready.

 

This is a Free Additional Base Ring for the LISALIN COCK CAGE VERSION 4.0.

Its Base Ring No.5 it has a inner Diameter of 47,5mm.

https://cults3d.com/en/3d-model/naughties/lisalin-cock-cage-base-ring-no-5-47-5mm