Balls getting sore

Welcome to our community. I hope you find it useful and enjoyable. Search the topics for milking. that might relive pressure in balls.

 

Hi there and welcome to the mansion! You could try prostatic massage.?

 

You need to decide if it's just an ache from sexual frustration or if the cage is causing damage. Are your testicles just plump from lack of milking or are they swollen. You need to ensure you're not harming yourself. Good luck.

 

Why are you nervous about that? Btw, what sort of cage do you have, is it a Cell Mate?

 

If I were you, I'd enjoy the lockup for another 7 days and then see what happens, and try milking yourself to see if you can reduce some of the swelling in your balls. But, if you really want to get out, this video might contain the answer...

 

At the 1:52 mark in the video, he said that you can insert a small metal shim to click the opener, did you try that? If that doesn't work, at 2:12 he describes how to pry open the switch, did you try that? If you get the switch off, it appears that you need a 3v power supply to open the device. If you don't have a device that can generate 3v, you could get 2 standard 1.5v batteries and attach them together in series, held together with sticky tape, then attach probes to each end. If you don't have probes, maybe you could use paper clips attached to wires.

I guess you've been outted now!

 

Ah ok, so maybe you've found the problem, do you think you'd be able to reconnect the wire? Or, if you're saying that it's pulled out from the other side, that's not good. Therefore, you're only chance of getting out of the device is to try the metal shim idea.

If that doesn't work, have you ever considered permanent chastity?

 

Ok Chris, the best I can suggest then is that you try finding a locksmith in your area. If you find one, ask if you can email them the video above showing how to open the device, explaining that the wire is pulled, so the only way left to open it is with the shim method, and see if they think they can help. Of course, if they think they can, you will have to go see them in person and they'll have to do what they gotta do, but I don't think you have much choice at this point.

If you want to relieve some pressure in the meantime, you could try to get a vibrator or magic wand and try to stimulate yourself through the cage.

 

Wow, and how do you feel about that? Are you going to take him up on his offer?

 

my goodness..that's quite the ordeal you've gotten yourself into. as others have already said....as long as your testicles are warm and a normal color, not cold and discolored....you may just have to either keep trying to unlock it manually...did you perchance either set up the remote app, or use your or someones else's thumb or fingerprint when you first installed it?

seems you're really getting some very early first hand experience with chastity play....after this is over, you'll either continue to pursue this lifestyle, or hope to never see a chastity device again...sometimes technology isn't all its cracked up to be..please keep us informed of your progress...i for one am very intrigued and interested in your plight and story. all my best, and good luck to you.

 

Chris645,

While I'm beginning to think this is just a hoax post, on the off chance that you really are in this situation, this is what I'd recommend.

That video posted is VERY helpful. From that, you can make some measurements to see how far back the motor is situated from the long pin which holds the two major parts together. You might have to use some proportional calculations (1" on the computer screen equals x" in real life), but you should be able to know exactly where to cut down from the top on either side and the end of the motor.

If you don't have access to one, purchase a variable speed Dremel tool with cut-off disks. There are cheaper alternatives than Dremel, but the variable speed feature will allow you to keep the speed low. You're only cutting through plastic, so you don't need a lot of speed or power.

Using your measurements, cut out the plastic in a rectangular shape right above the motor and remove the plastic. Accuracy isn't that important, cutting it a bit bigger than you need is fine. The device is trashed anyway. You should be able to then pull the motor out so that it releases the force on the pin. You might have to insert a small object into the device to retract the locking pin as the locking function appears to be spring loaded. This should release the main pin.

I hope you're not really in this situation, but if you are, good luck.

~subrick

 

Chris, before you spend money on a Dremel tool and then completely destroy the Cellmate, please go to a locksmith and see if they can get you out. They have tools and have the skills for this sort of thing. It appears that the only problem with the Cellmate is that wire that's got disconnected, so once you have the device off, you might be able to fix it (if you have a soldering iron).

As for the Dremel, you don't need to get the brand name version, I have the WEN version and it works just fine, it's on ebay now for $27 with free shipping: https://www.ebay.com/itm/283996083136

 

it's kind of a shame to have to destroy a rather expensive chastity device...but i can only partially empathize with your situation....and don't really know i would react if facing your dilemma. again...good luck getting out of it in one piece.