Query: recommendations / guidance for next cage & girth?

Hello folks,


This sissy gurl is rather distraught with her chastity experience to date.
Filled with several false starts, due in large part to the girth of the cock she is trying to train into a well-behaved little sissy clitty.


The shaft "resting" specifications are thus:

diameter: ~43 mm

length: ~101 mm

I recall something in the vicinity of 25% compression was acceptable / ideal for length (110 --> 75ish mm), to ensure snug fit inside the tube (without a lot of wasted space.)


What is the general recommendation or guidance for girth when it comes to sizing?
Its there a recommended acceptable compression level, or is it better to aim for natural girth?

It has been this gurl's experience that 35 mm is "too small" diameter to accommodate a rather "dynamic" area such as a clitty in training.
Tube "load-in" seems near impossible to do completely, so there ends up being a lot of cock left un-confined.

Thoughts / input / recommendations are invited! <3


# Candidate cages for next purchase:

Limited budget, not able to drop $500 for a custom fit metal cage (not ready for that investment yet.)

## Cherry Keeper, @JosieLynn Jewell

- tier 1 vendor, not a clone!

- lots of options for color / texture / sizing

- worthy of "supporting local" (supporting our community)

- internal lock, no "click" from travel

### UNIT 0: Custom - CKC-FMAA1S-19

https://www.shapeways.com/product/9QE3VG7SS/cherry-keeper-custom-ckc-fmaa1s-19

### UNIT 1: Custom - CKC-IK2USO-19

https://www.shapeways.com/product/49XYQ42LQ/cherry-keeper-custom-ckc-ik2uso-19

## Kink3D

- tier 1 vendor, not a clone!

- internal lock, no "click" from travel

### UNIT 0, S (1.1x)

https://kink3d.com/collections/cobra-cages/products/s-cobra-cage-only?variant=38103931322567

## Kink3D (clone), Sissy Joyce

- tier 2 or 3 vendor, reselling what appears to come from Asias manufacturers (possibly of a higher tier than average)

- cheaper buy, with the problems inherit of such "deals"

### Feminizer v2

https://sissymarket.com/collections...-cage-the-feminizer-v2?variant=42441084502246

## Other vendors & units of note?

 

This gurl thanks you so much!
Really appreciate the advanced insight and recommendations.

Indeed, shorter is very preferred.
Ultimate goal is to get down to the ~25 mm length.

Figured I need to start somewhere first thought?

 

Thanks everyone for your help!
This sissy gurl is super excited for the cage + ring she just ordered, 3 weeks - 1 month cannot come soon enough!
Soon will be able to show this girthy clitty who is boss, and get on with sissygasm training & serving her Goddess! :-D

What she ordered:

CKC-CKMXCD-20 (black, PA12)

https://www.shapeways.com/product/CRE7PSVJU/cherry-keeper-custom-ckc-ckmxcd-20

G2 - 42mm Ball Hook Handles (black, PA12)

https://www.shapeways.com/product/NRHZURT2K/cherry-keeper-ring-g2-42mm-ball-hook-handles
- thanks for having a handles option, as I need to use a retention strap, which usually rubs against skin when threaded through the primary ring

 

Thank you for the reference photo, it helps to give me confidence in this important step forward.

Do you find it suitable for long-term wear?
Any concerns with regards to discoloration?
Did you have any post-delivery maintenance to do (EG: sanding)?
What material did you order with (I went with black PA12 - not the fancy smooth one)?
Does a standard "sleeve lock" fit (I have several from all the Chinese Clones I have been trying out)?

 

Bit of an update to this thread.
I received my cage & ring, and the it was good (very snug!)
I did have to unlock to sand & heal some ring rash (but that has nothing to do with CK.)

I since learned I actually am likely to better fit a 45mm base ring instead of the 40mm I got.
The 40mm was giving me some wicked shaft edema and could barely get it on (not CK problem, learning on my part.)
This was an opportunity for me to ask @JosieLynn Jewell for further guidance, and she was a real gem!
This enabled me to order a 45mm base ring (double-ring w/ handles) with the knowledge that I can also get the Unicorn accessory (as this one had just been updated in design.)

I also ordered a longer tube, mentioned above since the one I got was ill-suited for my current level of "training" for overnight (DESTROYER + morning wood == barely sleeping / waking to feel like my guts were being ripped out via my balls.)

Anyway, all of this to say I am now looking very forward to more CK hardware (that shipped early!)
So very happy that CK are interchangeable (as it should be for cages), as I can re-use my previous tube for "day-wear" and as I make progress on the "training" to rein in DESTROYER.

Very happy Cherry Keeper customer! <3

# base-ring:

https://www.shapeways.com/product/5...-double-handles?optionId=243375962&li=ostatus

# tube:

https://www.shapeways.com/product/9...om-ckc-fmaa1s-19?optionId=94725527&li=ostatus