..I have noticed the connection between cage and ring seems to get slightly more play in time. This will lead to the cage moving - the gap between the bottom of ring and cage to grow bigger slightly. The result ones balls has a change to slip out. .I made an insert - cut to the same shape as the connection point of ring and cage. Looks like a small horse in shape. I used a old credit card for the plastic material it was the right thickness Now the play is a lot less - very solid like when it was new
I have experienced the same progressive looseness in my HTv2, leading to a particularly uncomfortable ball escape episode that caused my to relegate my HTv2 to the penalty box... I recently saw a post in another forum where this was addressed this by immersing the HTv2 parts (unattached to each other) in hot water (not boiling mind you, just the hottest available from the tap) and letting them sit that way till the water cooled to room temperature. The poster claimed that this caused the resin to reset itself to its original shape. I just tried this, and it did work!!! My HTv2 has been restored to its prime!
That is probably why mine isn't too bad as that is part of what I do to clean it. I let it soak in hot tap water for a few hours each time I am released after I have given it a good soapy scrub.
Great post guys I have almost stopped using my HT2 due to a slip out a while ago. It's generally more comfortable than my metal cage so I will give it a try. Thanks.
I am having the same problem with mine. When my Mistress lets me out tonight of tomorrow i will try this.