Tether Spout first experience

Discussion in 'Chastity and orgasm denial' started by Sissystephaniex, Jul 5, 2022.

Random Thread
  1. Sissystephaniex
    Offline

    Sissystephaniex SissyStephanieX

    Joined:
    Mar 17, 2020
    Messages:
    3
    Likes Received:
    500
    Trophy Points:
    48
    Location: (Country, Region - and perhaps even City?):
    Netherlands, South-Holland
    Local Time:
    4:02 PM
    Hi all,

    This afternoon I received my first Tether Spout, I was super excited and decided to install the spout immediately. After about 45 minutes I finally got the spout secured in my urethra. Getting the ring over the rod took me quite some time, but I think I figured it out now.

    The spout is super secure. I tried pulling on it a few times and it really won't come out. I chose a random size for the spout and ring, since I don't really have the right equipment to measure my urethra. I think I guessed pretty well, after warming up and stretching my urethra the spout went in quite easily and I can't just pull the spout out.

    The only downside is that the rod is way too long! It sticks about 1.3 Centimeters out of my urethra. It should be equal/ slightly longer than the tip of my cage. I just don't really know how to shorten the rod and get a smooth polish on it. I'm not very good with DIY things :p

    I've been wearing it for a few hours now and so far it's not too bad. It just gets a little sore when I try to get hard, but it's not too bad yet. I guess I need to give myself some time to get used to having a rod up my urethra for longer periods.

    My goal is to able wear it for multiple weeks straight and have a 100% secure chastity cage. :lock:

    Does anyone else have experience with Tether Spouts?
    • How was your first time experience?
    • Do you have to give your body some time to get used to it?
    • Does the soreness go away?
     
  2. Sissystephaniex
    Offline

    Sissystephaniex SissyStephanieX

    Joined:
    Mar 17, 2020
    Messages:
    3
    Likes Received:
    500
    Trophy Points:
    48
    Location: (Country, Region - and perhaps even City?):
    Netherlands, South-Holland
    Local Time:
    4:02 PM
    Here are some pictures. I wear the Kink3d Cobra cage (The baby variant).

    [​IMG]

    As you can see the rod is way too long. I'm not sure yet how I'm gonna secure the spout. This padlock could work, but it gets stuck on my clothing because the rod is too long. A unique number seal would be better, but I think I could pull those plastic seals through the front of my cage.

    [​IMG]
     
  3. Aspire02
    Offline

    Aspire02 Long term member

    Joined:
    Aug 15, 2019
    Messages:
    512
    Likes Received:
    1,271
    Trophy Points:
    123
    Gender:
    Male
    Occupation:
    SEA
    Location: (Country, Region - and perhaps even City?):
    Norway, Oslo
    Local Time:
    4:02 PM
    i have a cage like the one you had before the locker 02. I really like the feeling and its secure
     
  4. Chaste Nole
    Offline

    Chaste Nole Long term member

    Joined:
    Oct 30, 2020
    Messages:
    346
    Likes Received:
    167
    Trophy Points:
    53
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    Florida
    Local Time:
    10:02 AM
    I believe there is a board member "Zorglub" who may manufacture custom tether spouts. The original vendor seems to be depleting his inventory.
     
    sis_nikki likes this.
  5. Jessica Alexander
    Offline

    Jessica Alexander Trans woman not a mistress or Dom

    Joined:
    Jan 26, 2016
    Messages:
    2,252
    Likes Received:
    4,553
    Trophy Points:
    143
    Gender:
    Female
    Location: (Country, Region - and perhaps even City?):
    Houston
    Local Time:
    3:02 PM
  6. ozzy-one
    Offline

    ozzy-one Long term member

    Joined:
    Apr 9, 2011
    Messages:
    335
    Likes Received:
    657
    Trophy Points:
    93
    Gender:
    Male
    Occupation:
    Tradesmen
    Location: (Country, Region - and perhaps even City?):
    Michigan, USA
    Local Time:
    10:02 AM
    If you measure everything carefully including the amount you want removed and the location of the hole for a lock, it would be a quick and inexpensive job for a machinist to modify. I must tell you, these spouts are something that I’ve wanted to try, congrats for helping me to decide
     
    Sissystephaniex likes this.
  7. Ginanhanes
    Offline

    Ginanhanes Long term member

    Joined:
    Jul 12, 2017
    Messages:
    152
    Likes Received:
    328
    Trophy Points:
    63
    Local Time:
    9:02 AM
  8. enslavedbyc
    Offline

    enslavedbyc Junior Member

    Joined:
    Apr 26, 2010
    Messages:
    551
    Likes Received:
    695
    Trophy Points:
    93
    Gender:
    Male
    Local Time:
    8:02 AM
    Do yourself a favor QUIT using it. Then go to https://tetherproducts.com/Pages/TopTier/home.html

    and by a measuring sound, the $40 bucks will definitely be cheaper than a medical issue cause by you obviously mis-sized spout. Then buy the correct size items. Their prices seem completely reasonable.

    That my opinion anyways. No I haven’t used a tether spout (I’ve had a PA for over 30 years. I do have substantial experience with sounds and princes wands. Damaging your urethra is to be avoided.
     
    Jammy likes this.
  9. Sissystephaniex
    Offline

    Sissystephaniex SissyStephanieX

    Joined:
    Mar 17, 2020
    Messages:
    3
    Likes Received:
    500
    Trophy Points:
    48
    Location: (Country, Region - and perhaps even City?):
    Netherlands, South-Holland
    Local Time:
    4:02 PM
    The spout itself is the right size. It's just the overall length that's wrong. This tether spout isn't made for chastity, but just normal urethra play.

    The tetherproducts.com web site is not great looking and I have no idea if they are still in operation. Also I've heard the products tetherproducts make are not made out of the right surgical steel. Peoplr have noticed tiny corrosion spots upon taking the tether spout out.
     
  10. enslavedbyc
    Offline

    enslavedbyc Junior Member

    Joined:
    Apr 26, 2010
    Messages:
    551
    Likes Received:
    695
    Trophy Points:
    93
    Gender:
    Male
    Local Time:
    8:02 AM
    Good Luck.
     
    tecolote likes this.
  11. cogman
    Offline

    cogman Long term member

    Joined:
    Dec 21, 2010
    Messages:
    1,006
    Likes Received:
    1,787
    Trophy Points:
    143
    Gender:
    Male
    Occupation:
    Business owner
    Location: (Country, Region - and perhaps even City?):
    Australia - Sydney
    Local Time:
    1:02 AM
    Wow you are very pretty.

    My tether has been in me for about 6 months without removal, while mistress has let me out for vacation etc, the tether stays in. For the last month I have been in a modified steelheart 2 24/7 after switching from a looker 2. We have sex with a little black cap over the top and the tether stays in....tho sex feels wonderful and so does the ending, it throbs after because the mess has no where to go.

    Mine is from the tetherspout website, its no so much the stainless is bad the machining on the inside of the spout is a bit rough. But yeah his website is a bit bleah he has not changed it since I found it years ago. I used some wet and dry, a split pin into a drill with the wet and dry wrapped around the split pin the smooth the inside down...it stays a lot cleaner that way.

    The only problem I have had is of my own making. You cant fuck with the cage too much, if you pull too much on the cage the head of the cock will swell up...then for one thing its really hard to get out...though I just leave the cage of for 24-36 hours and it goes back down without removal. the other time that happened was during sex and mistress moved weird and it pushed the spout in crooked which instantly killed the erection and hurt like fuck.

    Not had any infection issues at all. The steelheart 2 fits like a glove and removal is impossible. The only way to cheat is with my partners palm power...which is locked away with my key. anyways my tether pics with the looker 2 and steelheart are in my album. The Steelheart is super easy to keep clean which was a real worry for me at first but using a attachment for the shower which is actually a enema attachment...it shoots out a jet of water which can be directed into the cage and keeps everything clean.

    In answer to your question.

    It takes some getting use to it. It took a lot of patience to get it right, one of the reasons I dont take it out is because its hard to get back in and it always hurts for a while (not much but its sore) after insertion and usually swells a bit such that it pulls the retainer deeper.

    The soreness does go away and as I sit here I honestly can not feel it at all. Or my cage, or whats inside when I touch it.

    Hope that helps
     
  12. Mensa2012
    Offline

    Mensa2012 MensaAbz

    Joined:
    Jun 13, 2022
    Messages:
    30
    Likes Received:
    146
    Trophy Points:
    33
    Gender:
    Male
    Local Time:
    3:02 PM
    Where did you get your items from? I bought some from tetherspout over a year ago but I estimated the wrong length. It was too short so just slips out with any kind of force. I’d like to try this length one.
     
  13. MouseJstr
    Offline

    MouseJstr Active member

    Joined:
    Jan 21, 2018
    Messages:
    118
    Likes Received:
    86
    Trophy Points:
    38
    Gender:
    Male
    Local Time:
    9:02 AM
    anybody aware of any alternative reasonably prices sources of tetherspouts since the creator looks like they are no longer manufacturing any new ones?
     
  14. jrrydex2
    Offline

    jrrydex2 Junior Member

    Joined:
    May 17, 2008
    Messages:
    28
    Likes Received:
    22
    Trophy Points:
    3
    Local Time:
    3:02 PM
  15. MouseJstr
    Offline

    MouseJstr Active member

    Joined:
    Jan 21, 2018
    Messages:
    118
    Likes Received:
    86
    Trophy Points:
    38
    Gender:
    Male
    Local Time:
    9:02 AM
  16. Qs4s
    Offline

    Qs4s Member

    Joined:
    Aug 13, 2020
    Messages:
    18
    Likes Received:
    14
    Trophy Points:
    13
    Gender:
    Male
    Local Time:
    10:02 AM
    Has anyone seen a non-ball trap device with a tether spout? I have massive issues with the ring on my devices when riding bikes. I'd love to get something inescapable, shaft only, no piercing. (Likely a dream for most of us)
     
  17. MouseJstr
    Offline

    MouseJstr Active member

    Joined:
    Jan 21, 2018
    Messages:
    118
    Likes Received:
    86
    Trophy Points:
    38
    Gender:
    Male
    Local Time:
    9:02 AM
    This feels like a easy 3D print.. I have a 20mm and 24mm tetherspout on order right now. If I ever find myself unlocked again, i'll maybe explore doing this myself..
     
  18. madams-sissysub
    Offline

    Joined:
    Apr 30, 2009
    Messages:
    12,080
    Likes Received:
    6,514
    Trophy Points:
    143
    Gender:
    Male
    Occupation:
    nurse
    Location: (Country, Region - and perhaps even City?):
    uk (west mids)
    Local Time:
    3:02 PM
    If it’s sore, take it out!
     
  19. Servus
    Offline

    Servus Long term member

    Joined:
    Jul 18, 2022
    Messages:
    1,259
    Likes Received:
    1,242
    Trophy Points:
    143
    Location: (Country, Region - and perhaps even City?):
    Germany
    Local Time:
    4:02 PM
    I also had the problems with the bikes with my old cages.
    You mean bicycles or motorcycles?

    After I put on the smallest I have got i didnt feel anything. No cage, no itching no nothing. Just a slightly pressure on my balls while cycling, which felt great.
     
  20. Newbie61
    Offline

    Newbie61 Active member

    Joined:
    Oct 23, 2022
    Messages:
    95
    Likes Received:
    161
    Trophy Points:
    43
    Gender:
    Male
    Occupation:
    Retired(early!)
    Location: (Country, Region - and perhaps even City?):
    Uk
    Local Time:
    3:02 PM
    Wow
    That looks amazing
     
  21. captivatedbyher
    Offline

    captivatedbyher romantic want to be

    Joined:
    Jan 28, 2018
    Messages:
    222
    Likes Received:
    307
    Trophy Points:
    73
    Gender:
    Male
    Occupation:
    Farmer
    Location: (Country, Region - and perhaps even City?):
    Northern NY
    Local Time:
    10:02 AM
    I use the tether spout with the peni-cap. I take it out every night and put back in each morning, takes about 20 seconds. I can't wear the cage 24/7 because it makes my shaft soar but the spout is no problem. Starting was weeks long, first day was in and right back out, 2nd was one hour, ect but my body got accustomed to it. I had to sand down the retainer and flared end of the spout to be able to get it in, and I use the threaded spout with a nut.

    WIth this system I can't see any advantage to a PA.
     
    LulledIntoSubmission and cogman like this.
  22. Servus
    Offline

    Servus Long term member

    Joined:
    Jul 18, 2022
    Messages:
    1,259
    Likes Received:
    1,242
    Trophy Points:
    143
    Location: (Country, Region - and perhaps even City?):
    Germany
    Local Time:
    4:02 PM
    Y
    You have got an adorable body.
     
  23. Mr. Silver
    Offline

    Mr. Silver New member

    Joined:
    Feb 12, 2023
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    1
    Gender:
    Male
    Local Time:
    8:02 AM
    Where did you buy yours?
     
  24. Caged for life
    Offline

    Caged for life Long term member

    Joined:
    Nov 4, 2022
    Messages:
    1,988
    Likes Received:
    1,404
    Trophy Points:
    143
    Gender:
    Male
    Occupation:
    Sheetmetal mechanic
    Location: (Country, Region - and perhaps even City?):
    USA
    Local Time:
    10:02 AM
    Good luck where did you get it from
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice