Hey folks, I purchased this cage here: https://www.aliexpress.com/item/32795464401.html?spm=a2g0s.9042311.0.0.30fd4c4dokmXK2 It actually fits pretty well. The only problem I have is that the ring has a joint that sometimes leads to pinching. Does anybody know if there is one of those chinese manufacturers who sell rings that are connectable to that locking system, but are differently built? Thanks a lot for your input!
Check out oxyshop and search for "rings" and see what you want... gonna be hard to find though given those holes.
While separate base rings are available, most of the Chinese devices are not built to exacting tolerances so switching “parts” isn’t always that easy. I would strongly suggest buying a complete device.
Problem is that I don't want to have another cage. The cage is perfect. I'd just prefer to have a solid base ring.
I use that latex tube (link above) on my hinged ring, and it has thus far prevented any pinching. It would be handy if rings were more interchangeable, but that's not happening in general
There are a bunch of rings on AliExpress without a hinge but with that gap for the lock ring. Think the distance between pinholes is 37mm for most of them. Or you could just find a kinky welder (they're out there, trust me ) and have him TIG the hinge and grind/polish it. HTH stu
As the hinge is hidden underneath your junk, then another solution could be to use something like JBWeld to smooth over the hinge, sand it down once it's set, and you'll then have a solid ring. - Try a practice run on an old bit of metal then you can experiment on what works smoothing it and rubbing it down before doing the real thing. - When doing it, do it with the lock in place so that it sets in the exact correct position.
I know you said you didn't want a different one but I have seen the same angled downward style cage with solid rings a few times but I can't think where. I did find this one on Amazon that looks the same to my casual glance: https://www.amazon.co.uk/BDWY-Chástity-Stainless-Virgini-ty-Sunglasses/dp/B091PZXMBG/
(totally not jijacking the thread but why does amazon allow such bizarre product titles which are clearly wong)
Thank you all for your comments! To be honest I got used to the ring. I also thaught it would be too small but it seems to work really well....almost no pinching
Hi, i am ABDL (adult baby & Diaper lover) and i love chastity devices, i like ultra tiny devices who makes my dick tiny inside my diaper and i hate chastity devices who slips (slide). Since i use it with diapers, and i pee on them, the wet make it more likely to slip and loose. i tried a lot of devices until i found the ones with that ring, but i make a "custom mod" on them, i put a large latex tube and glue it filling it from inside between metal and latex, i make it in "stages" because the glue got retract as it cure (i dont know the english name of the glue but is the one used to repair shoes or some wood working too). You have to let the glue dry well and dont touch, and always keep in mind the glue will retract a lot as it cure, maybe you will need some tries before you got it but once you learn you will be able to do it super easy. with this mod i can use it with my diapers have lots of "holded erections" keep my dick tiny and and dont move a milimeter, i love it. of course you have to replace the latex tube as it got decay, on my experience the glue lasted really good, i tried some dofferents but this one was the best i left some pictures so you can understand better. Sorry for my grammar English is not my language
the problem with those hinged rings, which is the problem I have with mine, is that they are not round. they are wider than they are deeper, so a lot more pressure is placed on the bases of your balls than with a round ring.