Product Testers Required (UK)

Discussion in 'Chastity device reviews and discussions' started by dayxwalker, Sep 22, 2018.

  1. dayxwalker
    Offline

    dayxwalker Member

    Joined:
    Sep 3, 2014
    Messages:
    45
    Likes Received:
    27
    Trophy Points:
    28
    Gender:
    Male
    Local Time:
    6:38 PM
    Hi everyone,

    I've recently set up a small business called 'Abstained' on the side making and selling 3D printed, custom designed chastity devices and we are looking for two product testers who would be willing to test and review the product for us.

    About Me
    I am a Design Engineer with a Masters in Mechanical Engineering and have 20+ years experience in the field, as well as 10+ years' experience with Chastity Devices. I have owned a vast number of varying chastity devices from cheap Chinese to high quality SteelWorxx devices, so have found out what does and doesn't work.

    Requirements
    We would require someone with an established PA piercing with a minimum gauge of 8. In order to make the product to size, we would require you to email us your measurements as per the attached sizing guidelines to; info@abstained.co.uk

    There are no catches with this - all we ask if for honest reviewers to tell us about;
    • Daytime comfort
    • Night time comfort
    • Ease of use
    • Product quality
    The product will be free along with associated items in the box and we don't require any payments from you - the condition is you give us constructive feedback by;
    • Starting a thread on Chastity Mansion reviewing the product
    • Completing a customer satisfaction survey via SurveyMonkey
    Once this has been done, you can keep the product to do with as you wish.

    What we need from you
    • A valid email address to send you your SurveyMonkey questionnaire
    • Your postal address
    • Your size requirements
    The device will take approx. 2 weeks to design, manufacture and ship to you.

    To express your interest, you can email us at: info@abstained.co.uk or PM me on this forum.

    Pictures below of one of my designs - the Captive PA

    Description

    The captive PA is a tube device suitable for a prince albert piercing. The device shields the head and glands of penis and is extremely lightweight. The design is clam-shell which gives the benefit of retaining a standard captive bead piercing for comfort. The design covers just beyond the head and piercing, which allows movement of the device during night time erections meaning a good nights sleep. The two clam-shells are held together with tamper proof bolts which are recessed. Once these bolts are fastened the clam-shells leave no gaps which could cause nipping of skin.

    Introducing the Captive PA.png
    Exploded View.png
    Views.png
    Sizing Guide.png
     
    Dogchasecats and jo3 like this.
  2. dayxwalker
    Offline

    dayxwalker Member

    Joined:
    Sep 3, 2014
    Messages:
    45
    Likes Received:
    27
    Trophy Points:
    28
    Gender:
    Male
    Local Time:
    6:38 PM
    Just want to clarify that we are willing to send the item to a tester internationally - the 'UK' in the title was meant to show that it was a product from the UK, not that we only wanted testers from the UK.
     
  3. keyheld
    Offline

    keyheld Member

    Joined:
    Mar 21, 2010
    Messages:
    367
    Likes Received:
    222
    Trophy Points:
    53
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    Hampshire, UK
    Home Page:
    Local Time:
    7:38 PM
    Interesting design. I would be interested
     
    dayxwalker likes this.
  4. dayxwalker
    Offline

    dayxwalker Member

    Joined:
    Sep 3, 2014
    Messages:
    45
    Likes Received:
    27
    Trophy Points:
    28
    Gender:
    Male
    Local Time:
    6:38 PM
    Hi everyone,

    Thank you to everyone who expressed an interest in this - we now have our two willing volunteers! Keep an eye out for reviews and hopefully we will have a brilliant product to introduce very soon! :)

    Thanks,
    Abstained.
     
  5. webbdaisy
    Offline

    webbdaisy Junior Member

    Joined:
    Jun 26, 2008
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Local Time:
    6:38 PM
    Hi do you have a website.
    thanks
    webbdaisy
     
  6. dayxwalker
    Offline

    dayxwalker Member

    Joined:
    Sep 3, 2014
    Messages:
    45
    Likes Received:
    27
    Trophy Points:
    28
    Gender:
    Male
    Local Time:
    6:38 PM
    The website is still under construction right now. However the product is available on a popular bidding site if you search for Captive PA
     
  7. dayxwalker
    Offline

    dayxwalker Member

    Joined:
    Sep 3, 2014
    Messages:
    45
    Likes Received:
    27
    Trophy Points:
    28
    Gender:
    Male
    Local Time:
    6:38 PM
    Here are some actual pictures of one of the Prototypes

    20180923_195147.jpg 20180923_195201.jpg 20180923_195322.jpg 20180923_195425.jpg 20180923_195453.jpg 20180924_180139.jpg 20180924_180222.jpg 20180924_180421.jpg
     
  8. JosieLynn Jewell
    Offline

    JosieLynn Jewell Active member

    Joined:
    Feb 12, 2018
    Messages:
    361
    Likes Received:
    463
    Trophy Points:
    73
    Location: (Country, Region - and perhaps even City?):
    Michigan, USA
    Local Time:
    1:38 PM
    Good luck with your product and company! That prototype is gorgeous, can I assume you're having it printed via SLS by a professional printer? If you don't mind me asking, who are you using?
     
  9. dayxwalker
    Offline

    dayxwalker Member

    Joined:
    Sep 3, 2014
    Messages:
    45
    Likes Received:
    27
    Trophy Points:
    28
    Gender:
    Male
    Local Time:
    6:38 PM
    Hi Josie
    The printing is being done in house. The finish is a result if hand finishing each device. It takes a lot of work but well worth it. Also makes the device water proof.
     
  10. jo3
    Offline

    jo3 New member

    Joined:
    Feb 11, 2018
    Messages:
    31
    Likes Received:
    13
    Trophy Points:
    8
    Gender:
    Male
    Local Time:
    7:38 PM
    It looks quite nice. Well no piercing here so it isn't really for me but none the least I can still admire it.
     
  11. dayxwalker
    Offline

    dayxwalker Member

    Joined:
    Sep 3, 2014
    Messages:
    45
    Likes Received:
    27
    Trophy Points:
    28
    Gender:
    Male
    Local Time:
    6:38 PM
    Hi Jo3
    Thanks. I am working on some none PA designs so keep a look out.
     
    Sub40s and Chaste J. like this.
  12. young88
    Offline

    young88 Active member

    Joined:
    Dec 17, 2011
    Messages:
    275
    Likes Received:
    147
    Trophy Points:
    53
    Gender:
    Male
    Local Time:
    4:38 AM
    The device needs some form of drain and flush hole where the Pa ring is placed. Urine will pool and start to smell very quickly. Would need to flush it with water regularly. Just my thoughts from long long experience with PA only devices
     
    corsac likes this.
  13. dayxwalker
    Offline

    dayxwalker Member

    Joined:
    Sep 3, 2014
    Messages:
    45
    Likes Received:
    27
    Trophy Points:
    28
    Gender:
    Male
    Local Time:
    6:38 PM
    Hi Young. Thanks for your thoughts on drainage. I can add a hole around the bottom of the PA ring no problem at all. I found during testing that this wasn't an issue as the join between the two clamshells is not water tight. However a hole would 100% ensure zero water gets trapped.
     
    DommeLP likes this.
  14. Faceaches
    Offline

    Faceaches New member

    Joined:
    Apr 7, 2018
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Local Time:
    6:38 PM
  15. young88
    Offline

    young88 Active member

    Joined:
    Dec 17, 2011
    Messages:
    275
    Likes Received:
    147
    Trophy Points:
    53
    Gender:
    Male
    Local Time:
    4:38 AM
    I think it would be a good idea, got to get all the urine out to prevent odours and would act as a good flushing hole when wash out with water through the front opening.
     
  16. dayxwalker
    Offline

    dayxwalker Member

    Joined:
    Sep 3, 2014
    Messages:
    45
    Likes Received:
    27
    Trophy Points:
    28
    Gender:
    Male
    Local Time:
    6:38 PM
    Yeah definitely adding it to the design. One option could be supplying it with a syringe that fits the hole snuggly so you can blast water in it when ever it’s needed. You could clean it out at work easily with the syringe.
     
    corsac likes this.
  17. young88
    Offline

    young88 Active member

    Joined:
    Dec 17, 2011
    Messages:
    275
    Likes Received:
    147
    Trophy Points:
    53
    Gender:
    Male
    Local Time:
    4:38 AM
    Another good idea. Happy to be a tester if you wish but in Australia.
     
  18. Dogchasecats
    Offline

    Dogchasecats Princess Elizabeth
    Verified Female

    Joined:
    Sep 22, 2015
    Messages:
    306
    Likes Received:
    531
    Trophy Points:
    103
    Gender:
    Female
    Occupation:
    Theater
    Location: (Country, Region - and perhaps even City?):
    Texas
    Home Page:
    Local Time:
    12:38 PM
    Thoughts

    This looks like it needs more ventilation.

    Why don’t chastity cages look good?
    They are plain and ugly usually. I would like a cage made by Gucci or one he could get from a jewelry store. You know women like pretty jewelry. I want one that looks better.
     
  19. Dogchasecats
    Offline

    Dogchasecats Princess Elizabeth
    Verified Female

    Joined:
    Sep 22, 2015
    Messages:
    306
    Likes Received:
    531
    Trophy Points:
    103
    Gender:
    Female
    Occupation:
    Theater
    Location: (Country, Region - and perhaps even City?):
    Texas
    Home Page:
    Local Time:
    12:38 PM
    Is that realistic?
     
  20. Unlucky
    Offline

    Unlucky Active member

    Joined:
    Aug 8, 2018
    Messages:
    429
    Likes Received:
    507
    Trophy Points:
    93
    Gender:
    Male
    Local Time:
    10:38 AM
    There are 3 main priorities when designing a chastity device: Security, comfort, and ease of cleaning.

    Chastity device makers do what they can to make them look better by giving color options when possible but that's about the limit of what they can do without sacrificing one of the 3 main priorities or seriously increasing the price. Since getting a device that fits comfortably can already be an expensive endeavor, I'm not sure there is much of a market for fashionable devices.

    Women are involved in a number of the custom creators, so it isn't just men making the devices with men buying them with both sides preferring function over aesthetics.
     
  21. dayxwalker
    Offline

    dayxwalker Member

    Joined:
    Sep 3, 2014
    Messages:
    45
    Likes Received:
    27
    Trophy Points:
    28
    Gender:
    Male
    Local Time:
    6:38 PM
    This is a little more bling..... could always glue some crystals to it
     

    Attached Files:

    Tall Chaste Guy likes this.
  22. jlankin
    Offline

    jlankin New member

    Joined:
    Oct 24, 2015
    Messages:
    7
    Likes Received:
    1
    Trophy Points:
    3
    Occupation:
    Software Engineer
    Location: (Country, Region - and perhaps even City?):
    London
    Local Time:
    6:38 PM
    Hello. I think this is a very interesting design. I'm curious about how it works for those of us who remain uncircumcised. Does the device need to be longer to mitigate interaction with the most sensitive parts of the foreskin?
     
  23. dayxwalker
    Offline

    dayxwalker Member

    Joined:
    Sep 3, 2014
    Messages:
    45
    Likes Received:
    27
    Trophy Points:
    28
    Gender:
    Male
    Local Time:
    6:38 PM
    Hi Jlankin
    The device works for uncircumcised users. I myself am uncircumcised and have no issues with it. The entry into the device is tapered to allow any excess skin to feed into the tube. The original design was much longer but it proved to be a little painful during night time errections. The shorter design allows the device to move slightly so that it aligns to piercing and so remaining comfortable. There is some scope to increase the length on the bottom side of it is required. We are open to any suggestions for improvements. We are implementing an extra drainage hole based on some feedback here.
     
  24. jlankin
    Offline

    jlankin New member

    Joined:
    Oct 24, 2015
    Messages:
    7
    Likes Received:
    1
    Trophy Points:
    3
    Occupation:
    Software Engineer
    Location: (Country, Region - and perhaps even City?):
    London
    Local Time:
    6:38 PM
    Thank you for the insights. What is the diameter of the captive PA ring? Can the device be modelled to align with smaller diameters? I currently wear a 16mm ring, for example.
     
  25. dayxwalker
    Offline

    dayxwalker Member

    Joined:
    Sep 3, 2014
    Messages:
    45
    Likes Received:
    27
    Trophy Points:
    28
    Gender:
    Male
    Local Time:
    6:38 PM
    Hi jlankin
    Yes every aspect of the device can be custom sized. As for designing for a 16mm diameter ring. It can be done but we provide the actual CBR as part of the package. So we would match your Gauge size and increase the overall diameter of it is needed as the design has to capture the PA with a screw that clamps the shells together. You can see this in the attached image.
     

    Attached Files:

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice