Hi Guys, newbie here in Chasity, let alone writing on a forum. I have had a steel cock cage for a few years and only until recently have started to use it. I love the way my GF has the keys around her neck and flutters her eyes, makes me devote my entire attention on her. Has anyone got any ideas in making the hinge at the bottom of the ball ring, not pinch. The skin finds its way between the hinge edges and nics. Any advice would be appreciated.
I hated the hinge, the only thing I found that worked was Turing a small piece of fabric, and putting it between you and the ring. Tension kept it in place, but it would need straightening periodically.
From your local hardware or hobby shop they usually sell surgical rubber tubing. Cut a piece about 1 to 2 inches and slip it over the hinged portion of the ring. You might have to experiment with how long you want the tubing to be. It should help.
The latex tubing works. I liked food grade silicone tubing on mine; I found it on ebay for cheap. Just be mindful you can't use silicone based lubricants with it, but you *can* use baby oil and baby oil gel. Latex will dissolve with those.
I am guessing that you bought an inexpensive steel one from China??? I had one of those and had the same problem. The only solution is to buy some rubber tubing and cover the hinge part of the ring with it. However, then you feel the edges of the rubber tubing which while not as painful, was still uncomfortable to stop using it. Hinged rings do not work well for most unless you are just going to wear it for a very short period of time. Also try covering the hinge with electrical tape or similar. Your best bet is to get a device, Chinese clone or the real thing, without a hinged ring. The CB6000 is a great starter device despite its price. It is comfortable and customizable too. You can even get an inexpensive clone of that too but get a device without a hinged ring. They all will hurt and pinch as I found out. Despite what I thought, the solid rings are the most comfortable and you soon learn how to push your testicles through them with ease and no pain.
The real solution. Is it the right size so you can go several days ? If not decide what is more likely the correct size . Order a solid ring cage . Xx Wendy
I had the same problem. I used a sleeve found in the foot care section of the pharmacy used for corns or something. It's rubber inside but cloth outside and about 1-1/2" - 2" long. Works great and I don't even know it's there. It covers the hinge and doesn't pull on your skin. Good luck.
I use this type from china has a short cage you can get 50mm 45mm 40mm ring I find it very comfortable and for long term use but they all take time for your body to get used to them http://www.dhgate.com/product/37mm-small-cock-cage-new-design-magic-lock/ I have tried the hinged type with rubber tube over the hinge but was hard to keep it moving over the skin this is solid ring
I had a steel divide with a split ring and it is simply unusable. It was comfortable until I became aroused then it pinched so bad it actually cut and scarred me. I am now looking to buy a new Chinese device until I'm financially able to go for something custom made.
Is silicone tape easy to remove without residue? Is it safe for contact with skin long term? Any experience with it? Was wanting to decrease size of base ring on my Chinese cage slightly as it slides down a little. Can't find tubing that would work without adding more width on the base ring than I would want.