Hi, I’m new here I was wondering if anyone could tell me if it’s possible to swap out the magic lock for a padlock - particularly the plastic disposable numbered ones? I really like the look of the holy trainer device but my Mistress and I need to use disposable locks because we are remote. I’ve tried a knock off CB600s and while it was a good introduction the plastic split on the ring with the pins after only two days - I guess you get what you pay for. Thanks
If you drill a small hole through the end of the lock (at the opposite end to the end the key goes in), then you could thread a numbered security tag through the lock, so preventing you from using the key (which you keep for when the security tag is allowed to be cut) Some locks already have a hole all the way through, have seen pictures of a tag being used this way, but can't find one off hand.
This guy have a plastic magic lock that can be use with a numbered tag https://www.shapeways.com/shops/pedro69 Named 6mm locker
I have two solutions for you: Replace the magic lock with this: https://www.shapeways.com/product/X...linder-plastic-lock-version?optionId=70578075 It fits in place and has a slit down it's length to allow a CB-X style numbered tag to go through it. It would wind up looking like this https://imgur.com/cPMCRD2 Store your key in one of these: https://www.shapeways.com/product/Z7WDLNJUU/the-cherry-keeper-pocket-safe?optionId=70253004 key hooks on to the peg inside, put the lid on, and put the numbered tag through and seal it. Images : https://imgur.com/a/jlicXUL There's also this magic locker that puts the tag external https://www.shapeways.com/product/4XGLDTRCN/6mm-locker-21mm-nylon?optionId=61097259 good luck!
Hello I purchased a shapeways magiclock I have Chinese cage and had them shorted the lock a little so it didn’t stick out so much My other setup is I also have cable security tag running my lock and cage 1/16 thickness cable works well
Thanks everyone for the replies! Why locking it in a safe didn’t occur to me I have no idea. I’ve ordered some of the plastic barrels recommended above. Looks like they’ll do the job.