I have a metal chastity cage, but find can’t get a balance between the ring size and length between “hard” whilst locked and soft. So much so that the cage rides very low just holding the last 2” of a “hard cock”, someone told me to invest in a strap to hold the cage up close to the body, has any one any ideas what to use for this and where from?
Hi.. This is the solution i use. https://metalhardware.co.uk/long-link-chain-jsnl01-11 Once correct length is found for waist size feed one end of chain through last link at other end, then over the post on the base ring of your cage before closing cage onto the base ring... Note, i have a base ring with a round post and had to spread link at one end of chain enough to slip over the post. Surprisingly comfortable, i have worn this 24/7 for weeks at a time with no problems showering or working, feels very secure as cant be removed without key. Order product code JSNL03... link length 32mm. Sorry for long explanation but wanted to be clear.
I am in a stainless steel Nub and have used a waist belt to relieve the additional weigh of the steel. The belt can be made of steel or just as simple as an old shoe string. With the weigh off and the proper sized ring, the Nub is comfortable and very secure. If you go will a locking steel belt, your KH will know you are very secure.
I bought one of the linked straps on a lark and I have to note that while keeping your cage high and tight to the body sounds great in theory, in practice it results in your cage sticking straight out which creates a noticeable bulge though that might be less of an issue with a micro cage.
Maybe this one? Even cheaper ... https://de.aliexpress.com/item/4001271842882.html?spm=a2g0s.9042311.0.0.27424c4dQBtr4F