Any Exobelt Extreme reviews?

Discussion in 'Chastity device reviews' started by js11756, Sep 15, 2009.

  1. js11756
    Offline

    js11756 Senior Member

    Joined:
    Dec 6, 2008
    Messages:
    250
    Likes Received:
    5
    Trophy Points:
    18
    Local Time:
    1:19 PM
    I have seen a few reviews at other places, but every single one reads like a sales add from the manufactures website, and that makes me suspicious. 'Revolutionary design'. Even the photos are stamped copyright the manufacture.

    Has anyone tried it and used it for more then one month constant wear?

    Thanks!
    js
     
  2. subklik
    Offline

    subklik Office Girl

    Joined:
    Jun 19, 2009
    Messages:
    703
    Likes Received:
    324
    Trophy Points:
    73
    Gender:
    Male
    Local Time:
    1:19 PM
    Very good question js,
    i have been intrigued by the Exobelt extreme.
    W/we are considering a new device but i am very active and i need to be able to bend kneel sit lift and various other things during the day and not have any hinderance.

    It would also serve me well to be able to stand up to pee.
    I work on construction sites about half of the week and offices the other.
    When on site there are awkward issues sometimes, ergo, need to stand up to pee.

    Did I mention security? If this unit is as good as described it would be the one, provided comfort issues are addressed.

    So anyone???

    Subklik.
     
  3. ladylionzsissy
    Offline

    ladylionzsissy male chastity sissymaid

    Joined:
    May 16, 2008
    Messages:
    440
    Likes Received:
    74
    Trophy Points:
    28
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    east coast
    Local Time:
    1:19 PM
    has anyone acquired this chastity yet? this seems to be the one for me but i'm hesitant without a review...
     
  4. Tom2001
    Offline

    Tom2001 Junior Member

    Joined:
    Jun 13, 2009
    Messages:
    19
    Likes Received:
    2
    Trophy Points:
    3
    Local Time:
    7:19 PM
    I have ordered one and expect it in one or two weeks. I have no connections with the supplier nor manufacturer and will let you all know how it compares with the CB3k I currently have in use.

    Greetings from The Hague, Netherlands
     
  5. js11756
    Offline

    js11756 Senior Member

    Joined:
    Dec 6, 2008
    Messages:
    250
    Likes Received:
    5
    Trophy Points:
    18
    Local Time:
    1:19 PM
    Thanks! Looking forward to your review.

    js
     
  6. Tom2001
    Offline

    Tom2001 Junior Member

    Joined:
    Jun 13, 2009
    Messages:
    19
    Likes Received:
    2
    Trophy Points:
    3
    Local Time:
    7:19 PM
    The Exobelt Extreme arrived a week ago. If you don't mind a few mistakes in my English (I'm Dutch), I will give you my opinion about it.

    When I received it, it immediately reminded me of something I read in one of the reviews about another Exobelt device: "it looks a bit like a home-made device". However, this does not mean that the functionality suffers from this.

    The concept is very interesting: the penis is not held in the tube by having your balls trapped between rings. It works by clamping the penis in the middle. Yes, the balls are trapped as well, but do not suffer much pulling force during an erection attempt, as in contrast with a ball-trapped device.

    If the proper spacers are used (quite a puzzle), pulling out is really hard or impossible. The profile is very small, because the device is compact. Very suitable for the average sized guy (not for those who do not fit within a CB3k or CB6k).

    So far, so good. The product meets the expectations.

    Now the disadvantages.
    1. The large locks spoil the small profile. These have to be replaced with smaller ones.
    2. There are many loose parts and everything quickly falls apart if you are nog very careful putting everything together. I suggest that - at least - the metal rods be fixed to the white plastic part.
    3. Skin is easily pinched while putting it on. Foreskin may protrude at the top.

    Hopefully with some experience it becomes easier to put this device on.

    I expect the Exobelt Extreme or its successor to become more successful if it is slightly improved. I like the concept very much. For now, however, I would only recommend it to people who don't mind buying smaller locks and who don't mind the difficulties with getting it on.

    I am not sure how the device will prove to be when used long term. This will be for someone else to discover, for I will switch to the Lancelot device (I like the flexibility of it when dressed in jeans).

    Hopefully others will also write their (independent) review.
     
  7. lionheartzion
    Offline

    lionheartzion Junior Member

    Joined:
    Sep 30, 2009
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    Local Time:
    10:19 AM
    just wondering, i ordered this the other day, and i wanted to know how you would remedy the lock situation
     
  8. Tom2001
    Offline

    Tom2001 Junior Member

    Joined:
    Jun 13, 2009
    Messages:
    19
    Likes Received:
    2
    Trophy Points:
    3
    Local Time:
    7:19 PM
    Perhaps I miss the point of your question, but isn't that the easiest of the problem issues to resolve: just buy smaller locks, like those used for the CB6000 or smaller (for example in a shop where they sell suitcases).
     
  9. Sierra538
    Offline

    Sierra538 Junior Member

    Joined:
    May 29, 2009
    Messages:
    15
    Likes Received:
    0
    Trophy Points:
    1
    Local Time:
    1:19 PM
    Exobelt Extreme

    I started out using a CB-2000, then a CB-3000 cage, and ordered a Exobelt Extreme and a CB-6000s.

    The Exobelt gives you a flat front, and keeps my balls towards the back.
    Unlike the CB-6000s that leaves a little bump. This almost feels like more of a sissifcation device than a chastity device.
    Don't get me wrong, you can not get aroused in it without discomfort.
    I have 1 medium & 1 small spacer between the back & bottom pieces.
    the 2 clear parts have no spacers and actually touch fully closed.
    then 2 medium spacers between the top & lock.

    I've lasted a month with the CB series. Was not pleasant...But had no choice...

    I still have the keys to this, and will see how long I can last in it without problems.

    Mistress Jenny does answer her e-mails. If you have any questions, I'm sure you can contact her also.
    An option she gives is to keep your keys fro 30 days. Send the locks open, and taped. So when you lock them, you are locked for 30 days...
     
  10. js11756
    Offline

    js11756 Senior Member

    Joined:
    Dec 6, 2008
    Messages:
    250
    Likes Received:
    5
    Trophy Points:
    18
    Local Time:
    1:19 PM
    I am most interested in how long you can stayed locked in it without it being removed for cleaning. I can stay in my cb6ks indefinitely as there is enough room in the tube to manage daily cleaning.
    I read a review elsewhere that some was locked in it for over 3 months without issue.

    On the device itself - how do you know that the two clear plastic pieces are tight/loose enough? It would seem to me that you could over tighten it pretty easily.

    I would also assume that with soap and water, you could pull out - but it looks like getting back in would be difficult. Can you comment?

    Thanks!
    js
     
  11. lionheartzion
    Offline

    lionheartzion Junior Member

    Joined:
    Sep 30, 2009
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    Local Time:
    10:19 AM
    i have it and i have had a hard time with it pinching my penis. i had small bruises where it pinched after only a day, and i also have trouble peeing in it when it is closed completely
     
  12. mchlturner796
    Offline

    mchlturner796 Junior Member

    Joined:
    May 6, 2009
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    1
    Local Time:
    6:19 PM
    The locks are the same size that come with the CB range. (luggage type locks)
    Easy solution. Use plastic zip ties as they are stronger than the plastic locks that come with the CB6, Or use a combo of both.
    Too many spacers?? Glue them together once you have the right combo. I measured my spacers and then asked Jenny if she had ones in that size. She sent me a medium spacer that was the same size as some of the small ones put together.

    You fit it so that you have a nice tight grip, but dont turn colors. It takes a little time of trial and error. Just like any other device.

    I just use a squirt bottle to clean down in the device like I did with the 3k. No issues. I cant pull out with soap and water because it traps the penis and grips it into place. It is very painful to try and pull out.
     
  13. saxrussell
    Offline

    saxrussell Junior Member

    Joined:
    Jan 15, 2010
    Messages:
    24
    Likes Received:
    3
    Trophy Points:
    3
    Local Time:
    1:19 PM
    I ordered it and was able to slip out accidentally in pretty short order, even with no spacers in between the two halves. She was helpful and sent me a modified version that would clamp "tighter". With this version I was able to clamp it so tight I couldn't pee but I was still able to retract things back past the ridge, and once I did that I was free.

    It is something about my anatomy, but I can pull out of anything I have tried except for a full belt. When flaccid, by bending over I can retract myself almost all the way into my body...I don't know what is going on because I'm not that short when erect! Anyway, I have tried numerous cage type devices and I don't think I am going to have any luck unless I get a piercing.

    Jenny at exobelt was very helpful in getting me a new unit but now that I am still having problems she has not replied to my e-mail.
     
  14. electrodick
    Offline

    electrodick Junior Member

    Joined:
    Sep 16, 2008
    Messages:
    57
    Likes Received:
    1
    Trophy Points:
    8
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    Victoria, Australia
    Local Time:
    4:19 AM
    I am Australia and it seems like a hassle to get it here, so I am happy with the fact that mchlturner796 is happy even if lionheartzion and saxrussell are not.

    I have a CB6000 & a Phoenix Saffire and they aren't bad, but still, if all is right, I can get out. It seems every couple of hundred I spend on these things I am a couple of hundred further away from a Neosteel Arch, which has had some glowing praise.
     
  15. Miss Adabella
    Offline

    Miss Adabella Junior Member

    Joined:
    Jan 16, 2010
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    1
    Local Time:
    12:19 PM
    @saxrussell

    My guy seems to have the same problem as you, he can retract completely into himself and I'd rather not make him get a full belt. If you find a device that is able to keep you in please let me know.
     
  16. mchlturner796
    Offline

    mchlturner796 Junior Member

    Joined:
    May 6, 2009
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    1
    Local Time:
    6:19 PM
    saxrussell, Perhaps you just need shorter pins to get a tighter fit below and above the plates. You want some space in bewtween the plates. Then you want the spacers stacked below and above tight enough so that there is not play with the spacers. I stack many below the first plate that goes on, so that the penis is held out a little further. It just takes time to fit no matter what device you use.
     
  17. rexcalibre
    Offline

    rexcalibre Junior Member

    Joined:
    Apr 7, 2009
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Local Time:
    12:19 PM
    Just got mine

    I got my exobelt extreme. First couple attempts to fit it were very painful. There are a million places to get pinced.

    I found what I think will be a good solution. I bought a 5/16 "U" bolt that was close to the right width and more than long enough. I then bought some 7/16 vinyl tubing (5/16 I.D.) and slipped it over the "u" bolt to just below where the thread starts. This acts as the bottom spacer and you will have to adjust this for your situation. I then figured out how tightly I wanted the two halves to close and made spacers from the vinyl tubing just a bit longer than they need to be. Next I put it on and using the nuts that came with the "u" bolt I tightened everything up. Using the tubing for the spacers allows you to snug everything up so their is no relative movement that can lead to pinching. My next step will be to wear it for a while to be sure I have the tension right then I'll cut the excess off the "u" bolt and drill them for the locks.

    My expierence so far is satisfactory. I imagine long term wear may be possible but not comfortable. (Then again who said this is supposed to be comfortable?) I popped in a lesbian porno to see if I could get hard in there and it got pretty uncomfortable. No way I could get my balls out and without getiing the balls out first I seriously doubt I could get my cock out. And absolutly no way to sneek back in if I did.

    I'll post again after I finish with the test fit and finally try it for more than a couple hours.

    Bottom line is I've tried a couple different devices and haven't yet been able to make them work as advertised but with my modification I have high hopes for this device.
     
  18. Bound_toServe
    Offline

    Bound_toServe In Her Service

    Joined:
    May 21, 2010
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    1
    Local Time:
    11:19 AM
    ExoBelt Extreme

    Hello all.
    i am new to this group and this is my second post.
    i am an experienced CB user having had several devices over the years. i got the Extreme earlier this month. i had been in a CB-6000 from the time they first came out and just got tired of having to repair it every few months. Mistress gave me permission to either get a CB-6000Short or the Exobelt. (i would shrink way to the back of the regular cb-6000).

    i selected the Exobelt Extreme as i also have the Exobelt X1 which was one of the best devices i have had.

    It did take a lot of adjusting to get it right. It does capture the penis. i am rather small so the two clear halves fit tightly together. Doing this i can manage to pull out if not using the ball ring but it is very difficult and very uncomfortable to do so.

    With the ball ring on and sized right there is no way i can pull out. The great thing is that my small penis is held in position in the cage and it can not shrink back like with the CB-6000. This makes it much less messy to pee and easier to clean. i am not normally allowed to stand to pee but Mistress let me try it a couple of times and i had no issues.

    I did have some problems with pinching on my scrotum when getting it sized correctly. The problem i had was the pin holes in the bottom clear half are not round but elongated from side to side. This allows the bottom half to slide from side to side which would sometimes catch the skin of my scrotum between the pin and the hole. I solved this problem in two ways. I substituted a small 1/4 i.d. O ring for the spacers. (i only was using two of the smallest spacer washers between the ball ring and the bottom half.) I also got a couple of 9/32 inch grommets and put them in the elongated holes on the bottom half. This held the pins much tighter so the bottom half does not slip as much. The O rings also let me make that area tighter and provide some flex that the hard spacers did not. They and the grommets also give some cushioning in case my skin does get caught. I have had no problems after doing this. i have not seen any other reports of scrotum pinching so it just be me.

    i have made a couple of other mods. The pins are much longer than needed. This means i had to put on additional spacers either behind the ball ring block or on top of the device. With them behind i was getting poked and with them in front it made the locks stick out which ruined the flat effect. Once i got the proper fit i made some custom pins that were just the correct size. Now i don't have to mess with a bunch of extra spacers when putting it on. Also, the O ring will hold the pin in place when putting it on. On the top I have one small O ring for cushioning and on of the small spacers then the lock. I just did not want the lock to rest directly against the top clear half.

    This is still a trapped ball device even though it does so in a different manor than the CB series. As such i have found some of the burning scrotal skin issues when in cold weather but it is still much better than with the CB series. A little lube on the scrotum takes care of the problem. With my CB-6000 i had to put lube on several times a day no matter what the weather. With the ExoBelt i only have to put on a small amount if the weather cold and causing my balls to pull up.

    Mistress removes my device about every six to eight weeks for inspection, thorough cleaning, and shaving the bits i can't get with it on. (unless of coarse she takes it off for teasing me). i will update the report at that time as to the effects of wearing it for that long.

    m
    In Her Service
     
  19. northern_light
    Offline

    northern_light Junior Member

    Joined:
    Feb 23, 2010
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    1
    Local Time:
    6:19 PM
    We purchased the Extreme a couple of weeks ago as the Cb6000 and the Sentinel just did not work at all. Caladia could escape from both and also did not like the angle at which they stuck out at in clothes. Plus having an active job she found that they both caused rubbing, chaffing and oedema. The first problem we came across was the back piece which dug into her thighs at either side causing soreness. We made a slight modificiation with ptfe rod covered in clear tubing which sorted this out. However we now find that the end of the penis slips out of the hole at the end and it easy to pull out of and get back into. We have now spent a fair amount of money on devices and although I adore chastity I am beginning to think that no device will ever be suitable and am quite loathe to spend more. I have considered both the Birdlocked and the BON4 but after reading various reviews I can also see us having issues with these. It may well be a case of mental chastity and trust now.
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice