Coral v8 - PA friendly

Discussion in '3D printing files' started by McSlavey, Apr 30, 2021.

  1. McSlavey
    Offline

    McSlavey Switchy Chastity Engineer

    Joined:
    Dec 22, 2009
    Messages:
    68
    Likes Received:
    98
    Trophy Points:
    18
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    Bay Area
    Local Time:
    1:41 AM
    See parts and photos on thingiverse: https://www.thingiverse.com/thing:4844767

    The base ring is from the generic chinese "Magic Lock A338" - I found one on ebay for $20. Lock included.

    Also check out my other design coral v5.1, which works with the same base ring and lock.

    pa-pin.stl is used to optionally secure a PA ring. The tube is designed specifically to facilitate experimenting with the placement of the pin so you can emperically discover the ideal distance the PA security pin should be based on your particular anatomy.

    Eventually I hope to turn this design into something of a modular chastity-tube-test-fit-kit that one can use to discover optimum dimensions based on their anatomical particulars, which then can be fed into a much sleeker parametric model that can be printed in metal.

    collar-v1.stl and spikering-v1.stl are optional inserts I designed to experiment with the effects and placement of a tight "entry collar" inside the tube. They are too small and/or too long for me, but it was too much work to rebuild the main tube with a bigger inner diameter to fit larger inserts. I plan to do this in the next rev.

    I used Autodesk Fusion 360 to create this design. If you would like to tweak it, please get in touch and I'll find a way to invite you to the project or export it to you.

    IMG_5787.jpg

    IMG_5791.jpg

    IMG_5790.jpg

    2020-01-22 coral v8 rev1.png
     
    DoctorDib, Fetish, Jarad and 2 others like this.
  2. Jessica Alexander
    Offline

    Jessica Alexander Trans woman not a mistress or Dom

    Joined:
    Jan 26, 2016
    Messages:
    2,252
    Likes Received:
    4,571
    Trophy Points:
    143
    Gender:
    Female
    Location: (Country, Region - and perhaps even City?):
    Houston
    Local Time:
    8:41 AM
    Unless you have a machine that can do nylon, I'd suggest printing at 100% infill with ABS or PETG. You can vapor smooth ABS with acetone for a super slick finish.
     
  3. McSlavey
    Offline

    McSlavey Switchy Chastity Engineer

    Joined:
    Dec 22, 2009
    Messages:
    68
    Likes Received:
    98
    Trophy Points:
    18
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    Bay Area
    Local Time:
    1:41 AM
    This design will be challenging to print with hobby-grade filament printers (FFM), depending on supports etc. Jessica Alexander's advice is a good starting point. Hobby photolithography printers should be able to handle it.

    For reference:

    - shapeways quoted $326 (~$370 w/ tax + shipping) to manufacture it out of stainless steel w/ gold coating.

    - i.Materialize quoted $1160 to make it out of surgical grade titanium.

    I assume both services would be far less expensive when using their nylon/plastic/other-low-cost substrates.
     

    Attached Files:

  4. Linjx014
    Offline

    Linjx014 Long term member

    Joined:
    Oct 8, 2018
    Messages:
    196
    Likes Received:
    670
    Trophy Points:
    103
    Gender:
    Male
    Local Time:
    3:41 AM
    Wow I love it. Great work man.
     
    McSlavey likes this.
  5. SergioUK
    Offline

    SergioUK Long term member

    Joined:
    Aug 18, 2018
    Messages:
    204
    Likes Received:
    173
    Trophy Points:
    53
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    London, UK
    Local Time:
    8:41 AM
    Interesting. I wonder if it could be adapted to work with the electronic locking mechanism of a Cellmate?
     
  6. Draconyx
    Offline

    Draconyx Active member

    Joined:
    Feb 27, 2016
    Messages:
    102
    Likes Received:
    27
    Trophy Points:
    38
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    California, USA
    Local Time:
    1:41 AM
    hmm.. I have interest in this... but its files are no longer on thingiverse. I noticed you mentioned shapeways. Do you have a shapeways shop to order this from?
     
  7. McSlavey
    Offline

    McSlavey Switchy Chastity Engineer

    Joined:
    Dec 22, 2009
    Messages:
    68
    Likes Received:
    98
    Trophy Points:
    18
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    Bay Area
    Local Time:
    1:41 AM
  8. hers
    Offline

    hers Junior Member

    Joined:
    Feb 18, 2010
    Messages:
    21
    Likes Received:
    35
    Trophy Points:
    13
    Local Time:
    4:41 AM
    This is an amazing design. I don't have a pa, but use a tetherspout (search the forum). i can envision several ways of securing it inside so when closed there is no way to free it.
     
    McSlavey likes this.
  9. McSlavey
    Offline

    McSlavey Switchy Chastity Engineer

    Joined:
    Dec 22, 2009
    Messages:
    68
    Likes Received:
    98
    Trophy Points:
    18
    Gender:
    Male
    Location: (Country, Region - and perhaps even City?):
    Bay Area
    Local Time:
    1:41 AM
    Thanks a lot for the feedback, @hers. Maybe you would be surprised, but I haven't gotten much feedback about it - so I really appreciate the recognition. maybe I should do more to share the work or make it more accessible... anyway, I am sure there are minimal mods you could make to get it working with your TA.
     
    hers likes this.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice