Holding the base ring against the body

The combination of a chastity device and something pulling the device to the body HAS been created. It is called a chastity belt.

As for what you're talking about, there is a demand. I suspect the reason it hasn't been created is because there is no real elegant solution.

 

Red Chili sell their discipline belt, see http://malechastity-devices.com/index.php/beltdiscipline

I have seen someone make their own with lay flat chain, I have also tried using standard chain which engaged with the two locating posts between the tube and the base ring and was thus locked in place. Normal chain is not very comfortable, lay flat would be better.

 

In my design queue is an add-on for the Cherry Keeper that takes nylon backpack style straps for doing just this. Theoretically you can di it now by threading shoelace or something through the mounting hole, but I think a more adjustable strap might be a nice option

 

You can find harness here:
http://allknight.com/products/mens-wear/bdsm-mens-harness/cock-jock-cock-harness.aspx

 

I use a flat chain around my waist in combination with all kinds steel cages, putting the chain ends directly across the typical 2 connector pins with which the cage plugs into the basering. In this way the chain locks onto the waist and the cage with the same lock of the cage, so it adds further security if the chain length is chosen well. I use it for many different cages and it wears very comfortably, even for a week or more. I have made the chain quite tight, so it actually pulls the cage a bit outwards, which is quite erotic although it makes the cage more visible under clothes. Attached are a couple of examples. The chain (stainless steel - does not rust) can be bought anywhere in hobby stores.

 

+1 for a solution where the band/chain/rope/etc. is locked on with the device lock - gotta admit, that's taking it to the next level.

 

Great idea, but that chain doesn't look flat to me. I've done something similar with the jewelry-class chains that lie really flat. I can't remember the names off the top of my head, and I don't have photos handy, but I'll look them up. My problem was that I don't have a cage with the type of post in your pictures, so the end link couldn't just be slid over the posts, and I had to jury-rig a lockable connecting cable to fasten the ends to the cage.

Bottom line is that it's eminently doable, and it's a shame that someone hasn't created something like this commercially, specifically designed to fit various devices. The Red Chili belt doesn't go far enough in using the right kind of chain, and the nylon or leather straps aren't secure at all, so why bother (unless all you're trying to do is prevent discomfort from erections, rather than preventing pullout).

 

Well, the chain is actually quite flat - I can wear it for a week without any skin irritations or damage. I have further experimented with various alternative ways to attach this chain to cages of different sorts, sometimes using an additional small padlock - so far I found solutions for quite a number of cages. I also found a way to add another flat (smaller chain) from the base ring across the buttocks to the chain on the back. Makes it all a very tight fit

 

The Heavy Rubber Shop in Germany have some pretty serious belts.

 

I tried using fishing line and it worked but left a mark, went to the craft store and found a kit to make my own nylon cords with clasps that work perfect.

 

If you want it for comfort so that the base ring is held close to you while sleeping [to prevent discomfort and nocturnal erections rather than for security], then why not just use a wide ribbon? Simply loop through the device ring / cage / lock/ post and tie it around your waist with a bow.

 

I've diy from a chest strap and nylon cord I never know I've got it on. I'm very active with work during the day lots of walking and driving this has helped a lot.

 

Master use aircraft grade wire that is encased in clear plastic tubing; I think is called Tygon. It is used as described by Mafsub. It makes the device very secure and more comfortable. The device can not be removed without my master's help.

 

I've used something like that, too.
https://fetlife.com/users/123390/pictures/36929615

 

You would think Someone would design a jockstrap type item to sinch it in nice and tight. Fabric that would fit over any style cage they can compress moderately snug should mitigate any of the tugging and pulling.

 

I used an old leather belt cut to size with a hole each end that pushed over the two posts when unlocked and it worked a treat, totally flat and very comfortable.

 

Any chance you have a photo? Sounds like a ingenious way to love the problem. I need to do that

 

sorry i dont have it anymore having moved on to a full belt but it was just a normal leather trouser belt with the buckle end cut off and i jut cut it off to the exact length i needed it having measured it around my waist and then i simply made a hole at each end (i drilled mine) that slipped over each of the two locking posts of the device. once they were fastened in place the device was supported close to me and there was no risk of slippage, i did also later make another one but this time is used a cut off section from an old seat belt or any webbing strapping would do and did the same thing but this time i melted a hole through it with a heated screwdriver and stopped the ends from fraying by running it over a flame and this then was waterproof and i could leave it fixed around me with the device even when i had a shower or bath.

 

I tried a athletic cup last night and it also worked fantastic. I may use the elastic band from that and make my own support strapsnthat are more rigid and a custom made pouch to hold the device as i want that to also be a vice like grip to not allow slippage

 

I use a tight thin ( not so thight to hurt cut circulation or hurt) marine rope to make myself a type of belt that threads around the lock twice. There’s a running end and a fixed looped on the other end.

This belt takes the weight of my parts and allows me to wear my metal cage all day without any discomfort of slipping or weighting down on my balls. I also use it at night to sleep. Hope it helps!