Spider chastity with insert

Welcome to the mansion!

Do you have pictures to show of this device?
What is the diameter of the urethral insert?

thanks in advance for feedback,

brgds

Felix

 

@Sub2785 Hello , I am sure I know the device you have , the insert is a flexible tube with stainless steel ends , right ?? Firstly let me say I am not a fan of urethral inserts and least of all the type I think you have , the main reason being in the best case they can with long term wear promote U.T.I and the type you have I am always concerned about the ends detaching from the tube , and becoming stuck inside you , That said the insert you have is relatively thick and if you have not used an insert before will give you problems trying to insert it , you might find using a narrower plug or sound for a few day will help stretch things and then try again , you need to start small and work your way up to the size you have , also plenty of lube and being flaccid will also help , also if you do use the insert make sure the end has no marks or rough spots on it ,

 

thanks, but Googling it brings me to for example to ebay, where they mention "sold out" and nothing more, other hits lead me to ll sort of things but not what I think is what you are referring to.

can you send me a link? that would be highly appreciated,

thanks in advance,

brgds

 

Hi
If the insert is like this:

https://www.chastitymansion.com/forums/index.php?gallery/photos/tiny-chastity.19403

Then it is really a case of gentle and lubrication, I use Vaseline, doesn't dry out so quick or get absorbed.

When I first used it, it did feel huge but you do desensitise after a while. Weeing after does sting, but again the urethra does toughen up, well mine did anyway.

 

Chastity Mansion - Error
You do not have permission to view this page or perform this action.

It seems I'm not allowed to view

 

Don't know why, can you see it by going through my profile?

 

Yes, I can
Thanks
Looks similar to what I have, unfortunately with me it causes leaking on the outside of the insert, creating a build up between the insert and the urethra, which you can understand is not the way to go long term

 

I think there is fluid being trapped in the urethra because when I took the urethral insert out for cleaning/desinfecting, I always saw liquid coming out.

regarding gadering in the cap of the divice, you are right that also happens.

But I have also tried an open design and then the cap is not a problem (because there is no cap) but when taking it out, there still is fluid coming our (and it is not from the inner side of the insert).

that is why I call it built up.. maybe not the right terminplogy but that is my experience.

 

I think that an inner urethral tube should have enough inside diameter to allow the normal flow rate.

The ideal (for me at least) would be:
- flexible (I have had the solid ones hurting my urethra,,,)
- long enough (about 10 to 12 cm in my case
- inner diameter 7 to 8 mm
- outer diameter not exceeding 10 mm (that is about the max I can handle)

My purpose would be just the fact that I need to remove it far less (maybe once a week, or even better every two weeks),

But that is probably wishful thinking, haven't found an insert like that yet,,