Hello everyone! new here so let's hope I do violate any rules or anything. But looking too order a new jailbird too replace my current jailbird. Mine is comfortable too wear but a little on the big side. The cage is wide enough to where my head gets kinda stuck in the corner. Which makes a mess when I go pee. So should like a cage which is snuger and keeps it centered. The tip is usually always touching the end of the cage but thinking of going a 1/4 inch shorter just for the restraint feel and the smaller look. Also in the mornings when I'm high and tight it's more then snug but as the day goes on and I start hanging pretty low the device nearly slides all the way off. So any advice would be much appreciated. Have pictures of me in each Senerio but not sure if I'm allowed to post such pictures. Thanks in advance!!
I just posted photos of my Jail Bird that might answer your question. I'm tight in the device and almost no room to get an erection but not tight enough that it would cause any problems. But when I do start to get an erection, I know it.
Ok just added the pictures of mine too my album on my profile. and Moe yours does look pretty snug and stuffed in there.
Ashley, looking at your photos, I'd definitely say you need to reduce the diameter by at least and ⅛ of an inch. I'd also definitely recommend going the ¼ inch shorter in the length. Perhaps even think about going an ⅛ smaller on the ring too. Get the sizing rings and try the next one down.
When I ordered my CD, Mistress MM said that it should fit like a glove and I took her advice. My device is snug not tight and I took many measurements of my length and again followed her advice. From your photos your CD is longer than necessary and wider than necessary.
Hi Looking at your photos especially the 4th one things do seem a bit too big for you . You may want to try a bit of tubing over the base ring and see if that is better thus suggesting that smaller would be good but still wearable. Xx Wendy
Ok think I'm going too go ahead and order a set of size of rings and see what I can find out. seen they have a double base ring witch may help or maby even a smaller gap. And how tight do you think I could get the cage itself around me before it turns into a issue. Think 1/4 would be too much?
Looking at your pics, I would say that your back ring is too large, the cage diameter is too large, and the cage length is too long. If you are a grower, you want to use your shortest length, and then subtract 1/4 inch. Also, your cage gap may be too large. I would ask MM about that.
Hi Ashley, Let me know what questions you have. A double base ring can hold the device closer to the body when the scrotum is stretched. Just know that a double base ring can never be adjusted in size. Mistress MM maturemetal@grandecom.net or sales@maturemetal.com
Some people have to use lube or they get irritated. Once I got my JB sized correctly, I didn't need any lube and I found that it stayed in place much better and the base ring wasn't falling down so much anymore. It's all about sizing, but it can be a long process to get the thing properly fit.
Thanks for all the great advise. figured ill give everyone a update too where I am now. since I got the sizing rings found out my current base ring is two sizes too big so that should help a lot. The length I think im pretty good at with my current device would like too go a 1/2 smaller just for a smaller cage and too help keep things hidden and think it would look more cute when its out. But afraid that it may end up being too crammed and become painful. But for the inner diameter looks like im going too go with a 1 1/8 inch since that ring seems too slide over my head pretty easy but a little unhappy with how its loose over the bottom of my shaft. but the 1 inch ring I have too really force my head through it but is way more snug over my shaft but guess the 1 1/8 seems too be the way too go.
I sized my JB to the 1/16th inch.... My base ring is 1 3/16". Maybe look to be that precise with your measurements.
I got the sizing rings. Found the number 6 ring 1 3/4 to be a good fit but can barely get two fingers one knuckle in. But I can't get the boys through he smaller ring below that. Should I stick with the 1 3/4? Also my measurement is 2inches and expect to get the 1/2 gap so I should order 1 1/2 taking off 1/2? I can get the smallest ring on but have to struggle for diameter. It isn't uncomfortable when it is on. The next ring is up is a little easier. Which is better? Is it tough to get into the cage?
I recommend that you call Mistress MM and talk to her. She knows better than anyone and can answer your questions. Love my JailBird.